Connection with U-Boot under Windows - Revision history

JulienB: Windows uBoot Connection moved to Connection with U-Boot under Windows: better name

2009-11-17T13:08:15Z

Windows uBoot Connection moved to Connection with U-Boot under Windows: better name

JulienB at 13:07, 17 November 2009

2009-11-17T13:07:20Z

JulienB: /* TFTP server installation */

2009-03-02T21:41:53Z

‎TFTP server installation

SonZerro: /* Ethernet TFTP server for Window$ */

2006-09-28T19:04:46Z

‎Ethernet TFTP server for Window$

Salocin68: /* Ethernet TFTP server for Window$ */

2006-09-27T19:45:56Z

‎Ethernet TFTP server for Window$

Salocin68 at 20:05, 22 September 2006

2006-09-22T20:05:53Z

New page

==RS232 configuration for Window$==
Instead of using the Hyperterminal (too many bugs), we suggest to use a free software named Tera Term Pro .

===Terminal installation===
Donwload (http://www.ayera.com/teraterm/) and install TeraTerm on your PC.

===Terminal configuration===
* Select serial connection on the first top window when opening TeraTerm
* Select your COM port
* In the "Setup" menu under "Serial port", modify the connection speed to 115200 (Default for uBoot)

===Terminal file transfer configuration===
* In the "File" menu, select "Transfer" , then "Kermit" then "Send"
If the Armadeus board is waiting for a kermit transfer, the file will be sent immediately

==Ethernet TFTP server for Window$==
In order to send quiclky your files (uBoot, Linux, rootfs ...) to the armadeus board, you can use a tftp server.
Once the server running, the files located in the server shared directory (or cuurent directory) will be accessible to the TFTP client (like an armadeus board).

===TFTP server installation===
Donwload (http://tftpd32.jounin.net/) and install Tftpd32 on your PC (Host).

===Server configuration===
* Select the directory in which the files you want to sent to the Armadeus board are located ("Browse" button)
* Set the server address if necessary (msut be your Host IP address)
If the Armadeus board has been correctly configured (host address, netmask ...) the transfer will start immediately.

@@ Line 8: / Line 8: @@
 * Select serial connection on the first top window when opening TeraTerm
 * Select your COM port
-* In the "Setup" menu under "Serial port", modify the connection speed to 115200 (Default for uBoot)
+* In the "Setup" menu under "Serial port", modify the connection speed to 115200 (Default for U-Boot)
 ===Terminal file transfer configuration===
@@ Line 15: / Line 15: @@
 ==Ethernet TFTP server for Window$==
-In order to send your files (uBoot, Linux, rootfs ...) with higher speed to the armadeus board, you can use a tftp server.
+In order to send your files (U-Boot, Linux, rootfs ...) with higher speed to the armadeus board, you can use a TFTP server.
 Once the server started, the files located in the server shared directory (or current directory) will be accessible to the TFTP client (like an armadeus board).

@@ Line 15: / Line 15: @@
 ==Ethernet TFTP server for Window$==
-In order to send quiclky your files (uBoot, Linux, rootfs ...) to the armadeus board, you can use a tftp server.
+In order to send your files (uBoot, Linux, rootfs ...) with higher speed to the armadeus board, you can use a tftp server.
 Once the server started, the files located in the server shared directory (or current directory) will be accessible to the TFTP client (like an armadeus board).

← Older revision	Revision as of 13:08, 17 November 2009
(No difference)

@@ Line 19: / Line 19: @@
 ===TFTP server installation===
-Donwload (http://tftpd32.jounin.net/) and install Tftpd32 on your PC (Host).
+Donwload this small and FREE server: [http://tftpd32.jounin.net/ Tftpd32] and install it on your PC (Host).
 ===Server configuration===

@@ Line 16: / Line 16: @@
 ==Ethernet TFTP server for Window$==
 In order to send quiclky your files (uBoot, Linux, rootfs ...) to the armadeus board, you can use a tftp server.
-Once the server running, the files located in the server shared directory (or cuurent directory) will be accessible to the TFTP client (like an armadeus board).
+Once the server started, the files located in the server shared directory (or current directory) will be accessible to the TFTP client (like an armadeus board).
 ===TFTP server installation===
@@ Line 23: / Line 23: @@
 ===Server configuration===
 * Select the directory in which the files you want to sent to the Armadeus board are located ("Browse" button)
-* Set the server address if necessary (msut be your Host IP address)
+* Set the server address if necessary (must be your Host IP address)
 If the Armadeus board has been correctly configured (host address, netmask ...) the transfer will start immediately.