Linux start screenshot - Revision history

Jorasse: add aof27 screenshots

2009-03-07T18:03:20Z

add aof27 screenshots

Show changes

Jorasse at 17:48, 7 March 2009

2009-03-07T17:48:59Z

Show changes

JulienB: oups

2009-03-03T08:49:12Z

oups

JulienB: move from Communicate

2009-03-03T08:47:45Z

move from Communicate

JulienB: /* Screenshot showing the serial text console during boot: */

2009-03-02T16:19:15Z

‎Screenshot showing the serial text console during boot:

JulienB: /* Screenshot showing the serial text console during boot: */

2009-02-25T16:57:20Z

‎Screenshot showing the serial text console during boot:

JulienB: /* Screenshot showing the serial text console during boot: */

2009-02-25T16:56:18Z

‎Screenshot showing the serial text console during boot:

Jorasse: /* Screenshot showing the serial text console during boot: */

2007-12-23T17:47:42Z

‎Screenshot showing the serial text console during boot:

Show changes

Salocin68: Screenshots moved to Linux start screenshot

2006-10-04T19:42:55Z

Screenshots moved to Linux start screenshot

217.128.254.186 at 11:17, 19 September 2006

2006-09-19T11:17:31Z

New page

==Screenshot showing the serial text console during boot:==

U-Boot 1.1.3 (Jan 8 2006 - 16:00:26) apm9328 patch 2.2

U-Boot code: 0BF80000 -> 0BFA2264 BSS: -> 0BFA7014
RAM Configuration:
Bank #0: 08000000 32 MB
Flash: 16 MB
In: serial
Out: serial
Err: serial
BIOS> boot
""##"" Booting image at 100a0000 ...
Image Name: Linux-2.6.12
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1028824 Bytes = 1004.7 kB
Load Address: 08008000
Entry Point: 08008000
Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux.................................................................... done, booting the kernel.
Linux version 2.6.12 (eric@supin) (gcc version 3.4.3) #2 Fri Jan 27 21:14:03 CET 2006
CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Machine: Synertronixx scb9328
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists
Kernel command line: console=ttySMX0,115200n8 mtdparts=scb9328_flash:256k(U-boot)ro,128k(U-boot_env),256k(firmware),1m(kernel),6m(root),-(fs) root=/dev/mtdblock4 rootfstype=jffs2 ip=192.168.000.2:192.168.000.1:192.168.000.1:255.255.255.0:apm9328dev::off
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 30208KB available (1884K code, 214K data, 96K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
i.MX Framebuffer driver
Console: switching to colour frame buffer device 30x40
apf9328_lcd_power: 1
Serial: IMX driver
ttySMX0 at MMIO 0xe0006000 (irq = 30) is a IMX
ttySMX1 at MMIO 0xe0007000 (irq = 24) is a IMX
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 1 RAM disks of 4096K size 1024 blocksize
dm9000 Ethernet Driver
eth0: dm9000 at edc3fffc,edc40000 IRQ 110 MAC: 00:0e:32:00:00:01
Probing scb9328_flash at physical address 0x10000000 (16-bit buswidth)
scb9328_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
6 cmdlinepart partitions found on MTD device scb9328_flash
Creating 6 MTD partitions on "scb9328_flash":
0x00000000-0x00040000 : "U-boot"
0x00040000-0x00060000 : "U-boot_env"
0x00060000-0x000a0000 : "firmware"
0x000a0000-0x001a0000 : "kernel"
0x001a0000-0x007a0000 : "root"
0x007a0000-0x01000000 : "fs"
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
NET: Registered protocol family 1
NET: Registered protocol family 17
eth0: link down
IP-Config: Complete:
device=eth0, addr=192.168.000.2, mask=255.255.255.0, gw=192.168.100.1,
host=apm9328dev, domain=, nis-domain=(none),
bootserver=192.168.200.1, rootserver=192.168.200.1, rootpath=
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 96K
Starting portmap daemon: portmap.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Initializing random number generator... done.
Starting network...
Starting sshd: OK

Welcome to the Armadeus project.

armadeus login: root

""BusyBox"" v1.01 (2006.01.27-18:50+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

#

← Older revision		Revision as of 08:49, 3 March 2009
Line 110:		Line 110:
	#		#
	</pre>		</pre>
−
−	~~==Testing TFTP==~~
−	* Put some files in ''/tftpboot''
−	* To test it from U-Boot:
−	~~<pre class="apf">~~
−	~~BIOS> setenv serverip 192.168.0.2 (the IP address of your tftp server/PC hosting the files to download)~~
−	~~BIOS> tftp ${fileaddr} apf9328-linux.bin~~
−	~~MAC: 00:1e:ac:00:00:01~~
−	~~operating at 100M full duplex mode~~
−	~~TFTP from server 192.168.0.2; our IP address is 192.168.0.10~~
−	~~Filename 'apf9328-linux.bin'.~~
−	~~Load address: 0x8000000~~
−	~~Loading: #################################################################~~
−	~~######################################################~~
−	~~done~~
−	~~Bytes transferred = 1604984 (187d78 hex)~~
−	~~BIOS>~~
−	~~</pre>~~
−
−	~~A more detailed [[Target_Software_Installation#Configure_U-Boot\|U-Boot configuration is in Setup Basics here]]~~

← Older revision		Revision as of 08:47, 3 March 2009
Line 110:		Line 110:
	#		#
	</pre>		</pre>
		+
		+	==Testing TFTP==
		+	* Put some files in ''/tftpboot''
		+	* To test it from U-Boot:
		+	<pre class="apf">
		+	BIOS> setenv serverip 192.168.0.2 (the IP address of your tftp server/PC hosting the files to download)
		+	BIOS> tftp ${fileaddr} apf9328-linux.bin
		+	MAC: 00:1e:ac:00:00:01
		+	operating at 100M full duplex mode
		+	TFTP from server 192.168.0.2; our IP address is 192.168.0.10
		+	Filename 'apf9328-linux.bin'.
		+	Load address: 0x8000000
		+	Loading: #################################################################
		+	######################################################
		+	done
		+	Bytes transferred = 1604984 (187d78 hex)
		+	BIOS>
		+	</pre>
		+
		+	A more detailed [[Target_Software_Installation#Configure_U-Boot\|U-Boot configuration is in Setup Basics here]]

@@ Line 1: / Line 1: @@
-==Screenshot showing the serial text console during boot:==
+==Screenshot showing the serial text console during boot (on APF9328)==
 <pre class="apf">
   U-Boot 1.1.6 (Dec 18 2007 - 20:27:52) apx9328 patch 2.6

@@ Line 32: / Line 32: @@
   CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
   Built 1 zonelists in Zone order.  Total pages: 4064
-  Kernel command line: console=ttySMX0,115200n8 mtdparts=apf9328_flash:256k(U-boot)ro,128k(U-boot_env),256k(firmware),1536k(kernel),6016k(root) root=/dev/mtdblock4 rootfstype=jffs2 ip=192.168.200.38:192.168.200.39:192.168.200.1:255.255.255.0:apm9328dev::off
+  Kernel command line: console=ttySMX0,115200n8 mtdparts=apf9328_flash:256k(U-boot)ro,128k(U-boot_env),256k(firmware),1536k(kernel),6016k(root)
   PID hash table entries: 64 (order: 6, 256 bytes)
   Console: colour dummy device 80x30

@@ Line 1: / Line 1: @@
 ==Screenshot showing the serial text console during boot:==
+<pre class="apf">
   U-Boot 1.1.6 (Dec 18 2007 - 20:27:52) apx9328 patch 2.6
@@ Line 108: / Line 108: @@
   armadeus login: root
+  #

← Older revision	Revision as of 19:42, 4 October 2006
(No difference)