SP VISION - Revision history

WikiSysop: /* On the APF_Dev /

2013-09-04T16:18:49Z

‎On the APF*_Dev

Salocin68: /* On the APF_Dev /

2012-08-20T16:38:33Z

‎On the APF*_Dev

FabienM: /* On the APF_Dev /

2012-01-06T16:46:09Z

‎On the APF*_Dev

FabienM at 10:57, 5 January 2012

2012-01-05T10:57:36Z

FabienM: /* On the APF27_Dev */

2012-01-03T17:05:57Z

‎On the APF27_Dev

FabienM: /* On the APF27_Dev */

2012-01-03T17:03:10Z

‎On the APF27_Dev

FabienM at 16:40, 3 January 2012

2012-01-03T16:40:09Z

FabienM at 16:25, 3 January 2012

2012-01-03T16:25:14Z

JulienB at 14:25, 7 November 2011

2011-11-07T14:25:22Z

FabienM: /* Configure the sp_vision Spartan6 with apf27-Dev */

2011-09-30T15:30:32Z

‎Configure the sp_vision Spartan6 with apf27-Dev

@@ Line 13: / Line 13: @@
 <pre class="host">
-[ ]$ make linux26-menuconfig
+[ ]$ make linux-menuconfig
 </pre>
@@ Line 30: / Line 30: @@
 then
 <pre class="host">
-[ ]$ make linux26
+[ ]$ make linux
 [...]
 [ ]$ make

@@ Line 47: / Line 47: @@
 On APF51:
 <pre class="apf">
-  # dd if=apf51_spvision_loader.bin of=/dev/fpgaloader
+  # load_fpga apf51_spvision_loader.bin
 </pre>

@@ Line 43: / Line 43: @@
 On APF27:
 <pre class="apf">
-  # dd if=apf27_spvision_loader.bit of=/dev/fpgaloader
+  # load_fpga apf27_spvision_loader.bit
 </pre>
 On APF51:

@@ Line 8: / Line 8: @@
 This virtual component is available in [http://periphondemand.git.sourceforge.net/git/gitweb.cgi?p=periphondemand/periphondemand;a=tree;f=src/library/components/sp_vision_configure;h=babdb0b05178267c1a8d077b0a1c5737820dea0e;hb=HEAD POD library], but if you don't want to make special design just for configuration, a standard design is provided in armadeus tree.
-== On the APF27_Dev ==
+== On the APF*_Dev ==
 * First select the driver for sp_vision_configuraton under linux-menuconfig :
@@ Line 36: / Line 36: @@
 </pre>
-For [[APF27]] the configuration bitstream can be found under the directory ''firmware/pod_scripts/'' and it's named '''apf27_spvision_loader.bit'''. To configure the second (sp_vision) FPGA, first (APF27) FPGA must be configured with this bitstream.
+The configuration bitstream can be found under the directory ''firmware/pod_scripts/'' and it's named '''apf27_spvision_loader.bit''' for APF27 and '''apf51_spvision_loader.bin''' for APF51. To configure the second (sp_vision) FPGA, first FPGA on APF* must be configured with this bitstream.
 * Configure the first fpga (if you transfer files by nfs):
 <pre class="apf">
   # modprobe fpgaloader
-  # dd if=/mnt/nfs/apf27_spvision_loader.bit of=/dev/fpgaloader
+</pre>
 </pre>
@@ Line 47: / Line 54: @@
   # modprobe sploader
   # modprobe sploader_prober
-  # dd if=/usr/local/your_sp_vision_bitstream.bit of=/dev/sp_loader
+  # dd if=your_sp_vision_bitstream.bit of=/dev/sp_loader
 </pre>
 = Communicate with sp_vision =

@@ Line 40: / Line 40: @@
 <pre class="apf">
   # modprobe fpgaloader
-  # dd if=/mnt/nfs/top_chargeur_spvision.bit of=/dev/fpgaloader
+  # dd if=/mnt/nfs/apf27_spvision_loader.bit of=/dev/fpgaloader
 </pre>

@@ Line 2: / Line 2: @@
 The SP_Vision board is an extension of [[APF27Dev]] and [[APF51Dev]] with a Spartan6 and two DDR. It is designed for real-time video processing.
 SP_Vision FPGA configuration is done through APF* FPGA, then to configure the SP_Vision FPGA you will need a configuration virtual component called ''sp_vision_configure'' under the APF*'s onboard FPGA.
 This virtual component is available in [http://periphondemand.git.sourceforge.net/git/gitweb.cgi?p=periphondemand/periphondemand;a=tree;f=src/library/components/sp_vision_configure;h=babdb0b05178267c1a8d077b0a1c5737820dea0e;hb=HEAD POD library], but if you don't want to make special design just for configuration, a standard design is provided in armadeus tree.
 == On the APF27_Dev ==

@@ Line 1: / Line 1: @@
-== Introduction ==
+= Introduction =
 The SP_Vision board is an extension of [[APF27Dev]] and [[APF51Dev]] with a Spartan6 and two DDR. It is designed for real-time video processing.
@@ Line 6: / Line 6: @@
 This virtual component is available in [http://periphondemand.git.sourceforge.net/git/gitweb.cgi?p=periphondemand/periphondemand;a=tree;f=src/library/components/sp_vision_configure;h=babdb0b05178267c1a8d077b0a1c5737820dea0e;hb=HEAD POD library], but if you don't want to make special design just for configuration, a standard design is provided in armadeus tree.
-== Configure the SP_Vision Spartan6 on the APF27_Dev ==
+= Configure the sp_vision fpga =
 * First select the driver for sp_vision_configuraton under linux-menuconfig :
@@ Line 43: / Line 47: @@
 </pre>
-== Configure the SP_Vision Spartan6 on the APF51_Dev ==
+== On the APF51_Dev ==
-−
 {{Under_Construction}}

@@ Line 38: / Line 38: @@
 Once the first fpga configured, just do :
+<pre class="apf">
 == Configure the sp_vision Spartan6 with apf51-Dev ==
 {{Under_Construction}}

SP VISION - Revision history

WikiSysop: /* On the APF*_Dev */

Salocin68: /* On the APF*_Dev */

FabienM: /* On the APF*_Dev */

FabienM at 10:57, 5 January 2012

FabienM: /* On the APF27_Dev */

FabienM: /* On the APF27_Dev */

FabienM at 16:40, 3 January 2012

FabienM at 16:25, 3 January 2012

JulienB at 14:25, 7 November 2011

FabienM: /* Configure the sp_vision Spartan6 with apf27-Dev */

WikiSysop: /* On the APF_Dev /

Salocin68: /* On the APF_Dev /

FabienM: /* On the APF_Dev /