JulienB: /* Links */

2011-03-29T16:02:05Z

‎Links

JulienB: /* Installation */

2010-05-10T14:39:23Z

‎Installation

JulienB: creation

2010-05-10T14:36:54Z

creation

New page

{{Under_Construction}}

==Installation==
As we use BlueZ 3.x you will need to install the following package: ''bluez-compat''
<pre class="host">
$ sudo apt-get install bluez-compat
</pre>
''BlueZ 3.x compatibility binaries
This package provides the legacy binaries that were reminiscent of the BlueZ 3.x pairing methods...The provided binaries are:
hidd dund pand''

==Usage==
* Configure APF as "server":
<pre class="apf">
# modprobe bnep
...
# pand --listen --role NAP
</pre>
* Connect Host PC:
<pre class="host">
$ modprobe bnep
$ hcitool scan
Scanning ...
00:19:88:xx:xx:xx APF
$ pand --connect 00:19:88:xx:xx:xx
</pre>

* Check connection is done on APF
<pre class="apf">
# hcitool con
Connections:
> ACL 00:19:0E:06:44:45 handle 42 state 1 lm SLAVE
# ifconfig bnep0
bnep0 Link encap:Ethernet HWaddr 00:19:88:xx:xx:xx
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
</pre>
* Fix IP adresses on APF and on PC:
<pre class="apf">
# ifconfig bnep0 10.1.0.1
</pre>
<pre class="host">
$ ifconfig bnep0 10.1.0.2
</pre>

* Check it is working:
<pre class="host">
$ ping 10.1.0.1
PING 10.1.0.1 (10.1.0.1) 56(84) bytes of data.
64 bytes from 10.1.0.1: icmp_seq=1 ttl=64 time=43.9 ms
64 bytes from 10.1.0.1: icmp_seq=2 ttl=64 time=13.2 ms
...
</pre>
<pre class="apf">
# ifconfig bnep0
bnep0 Link encap:Ethernet HWaddr 00:19:88:2B:56:3D
inet addr:10.1.0.1 Bcast:10.255.255.255 Mask:255.0.0.0
inet6 addr: fe80::219:88ff:fe2b:563d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:826 (826.0 B) TX bytes:1022 (1022.0 B)
</pre>

* If you have sshd running on the APF and created the guest account then you can try:
<pre class="host">
$ ssh guest@10.1.0.1
</pre>

==Links==
* http://bluez.sourceforge.net/contrib/HOWTO-PAN
* http://www.elinux.org/Bluetooth_Network

← Older revision		Revision as of 16:02, 29 March 2011
Line 74:		Line 74:
	* http://bluez.sourceforge.net/contrib/HOWTO-PAN		* http://bluez.sourceforge.net/contrib/HOWTO-PAN
	* http://www.elinux.org/Bluetooth_Network		* http://www.elinux.org/Bluetooth_Network
		+
		+	[[Category:Bluetooth]]

@@ Line 6: / Line 6: @@
 $ sudo apt-get install bluez-compat
 </pre>
-''BlueZ 3.x compatibility binaries
+''BlueZ 3.x compatibility binaries. This package provides the legacy binaries that were reminiscent of the BlueZ 3.x pairing methods...''<br>
-This package provides the legacy binaries that were reminiscent of the BlueZ 3.x pairing methods...The provided binaries are:
+''The provided binaries are: hidd dund pand''
 hidd dund pand''
-−
 ==Usage==

TCP/IP with Bluetooth - Revision history

JulienB: /* Links */

JulienB: /* Installation */

JulienB: creation