U-Boot-2012.04 - Revision history

Jorasse at 00:39, 9 July 2012

2012-07-09T00:39:06Z

Jorasse: /* Features/Status */ Add SD/mmc support on apf28 and apf27

2012-06-18T15:26:12Z

‎Features/Status: Add SD/mmc support on apf28 and apf27

Jorasse: /* Features/Status */ update apf51 test report

2012-06-12T16:04:52Z

‎Features/Status: update apf51 test report

Jorasse: /* Features/Status */

2012-06-11T22:59:27Z

‎Features/Status

Jorasse: /* Features/Status */ update apf51 test report

2012-06-11T20:17:13Z

‎Features/Status: update apf51 test report

Jorasse: /* Features/Status */

2012-06-11T18:53:48Z

‎Features/Status

PhilippeR: /* Features/Status */

2012-06-11T18:04:11Z

‎Features/Status

PhilippeR: /* Features/Status */

2012-06-11T17:42:32Z

‎Features/Status

PhilippeR: /* Features/Status */

2012-06-11T17:42:05Z

‎Features/Status

PhilippeR: /* Features/Status */

2012-06-11T17:40:34Z

‎Features/Status

@@ Line 1: / Line 1: @@
-==Activation==
+==Status==
-* todo
+* DONE!
-−
-==TODO list==
-−
-−
 ==Features/Status==

@@ Line 81: / Line 81: @@
 |----------------
 |'''PAR cleared''' || style="background:#00ff00;" | || Not Applicable || style="background:#00ff00;" | || Not Applicable ||   run unlock_regs; boot<br />once logged on linux try the command<br />imxregs CSR<br />should display imx register value instead of any error like "Unhandled fault"
 |----------------
 |'''NETCONSOLE''' || not supported || not supported || not supported  || not supported || [[Ethernet_console]]

@@ Line 59: / Line 59: @@
 |'''Board upgrade scripts''' ||style="background:#00ff00;" | || style="background:#00ff00;" | ||  style="background:#00ff00;" | || style="background:#00ff00;" |  || use the hereafter scripts to update the software of the board:<br /> run update_all<br />run flash_reset_env
 |----------------
-|'''I2C''' || style="background:#00ff00;" | 38 76 7F || postponed || postponed || style="background:#ff0000;" | 00 13 1A  : unreliable - device detected randomly||  startup sceen shall display:<br />I2C:   ready<br />the command "i2c probe" should return the list<br />of devices on the i2c bus of the board
+|'''I2C''' || style="background:#00ff00;" | 38 76 7F || postponed || postponed || not supported  : unreliable - device detected randomly ||  startup sceen shall display:<br />I2C:   ready<br />the command "i2c probe" should return the list<br />of devices on the i2c bus of the board
 |----------------
 |'''linux boot from flash''' || style="background:#00ff00;" |  || style="background:#00ff00;" | || style="background:#00ff00;" |  || style="background:#00ff00;" | ||  the command "boot" should start linux and rootfs from flash<br />the linux login should be "armadeus login: "

@@ Line 59: / Line 59: @@
 |'''Board upgrade scripts''' ||style="background:#00ff00;" | || style="background:#00ff00;" | ||  style="background:#00ff00;" | || style="background:#00ff00;" |  || use the hereafter scripts to update the software of the board:<br /> run update_all<br />run flash_reset_env
 |----------------
-|'''I2C''' || style="background:#00ff00;" | 38 76 7F || postponed || postponed || style="background:#ffff00;" | 00 13 1A ||  startup sceen shall display:<br />I2C:   ready<br />the command "i2c probe" should return the list<br />of devices on the i2c bus of the board
+|'''I2C''' || style="background:#00ff00;" | 38 76 7F || postponed || postponed || style="background:#ff0000;" | 00 13 1A  : unreliable - device detected randomly||  startup sceen shall display:<br />I2C:   ready<br />the command "i2c probe" should return the list<br />of devices on the i2c bus of the board
 |----------------
 |'''linux boot from flash''' || style="background:#00ff00;" |  || style="background:#00ff00;" | || style="background:#00ff00;" |  || style="background:#00ff00;" | ||  the command "boot" should start linux and rootfs from flash<br />the linux login should be "armadeus login: "

@@ Line 37: / Line 37: @@
 || power on the board and check the boot log of the board
 |----------------
-|'''NOR/NAND flash''' || style="background:#00ff00;" | 8 MiB||  style="background:#00ff00;" |  256MiB-2GiB || style="background:#00ff00;" | 256MiB  || style="background:#ffff00;" | 512MiB-4GiB || startup sceen shall display:<br />Flash: xx MiB
+|'''NOR/NAND flash''' || style="background:#00ff00;" | 8 MiB||  style="background:#00ff00;" |  256MiB-2GiB || style="background:#00ff00;" | 256MiB  || style="background:#00ff00;" | 512MiB-4GiB || startup sceen shall display:<br />Flash: xx MiB
 |----------------
-|'''RAM''' || style="background:#00ff00;" | 16/32 MiB||  style="background:#00ff00;" |  128MiB-512MiB|| style="background:#00ff00;" | 64-128MiB  || style="background:#ffff00;" | 256-512MiB || startup sceen shall display:<br />DRAM:  16 MiB
+|'''RAM''' || style="background:#00ff00;" | 16/32 MiB||  style="background:#00ff00;" |  128MiB-512MiB|| style="background:#00ff00;" | 64-128MiB  || style="background:#00ff00;" | 256-512MiB || startup sceen shall display:<br />DRAM:  16 MiB
 |----------------
-|'''Ethernet driver''' || style="background:#00ff00;" | dm9000||  style="background:#00ff00;" |  FEC0 || style="background:#00ff00;" |  FEC || style="background:#ffff00;" | FEC || startup sceen shall display:<br />Net:   <DRIVER>
+|'''Ethernet driver''' || style="background:#00ff00;" | dm9000||  style="background:#00ff00;" |  FEC0 || style="background:#00ff00;" |  FEC || style="background:#00ff00;" | FEC || startup sceen shall display:<br />Net:   <DRIVER>
 |----------------
-|'''Ethernet MAC''' || style="background:#00ff00;" | dm9000 read<br />00000000: 1e00 00ac|| style="background:#00ff00;" | bdinfo<br />...<br />ethaddr     = 00:1e:ac:... || style="background:#00ff00;" | bdinfo<br />...<br />ethaddr     = 00:1e:ac:... || style="background:#ffff00;" | iim read fecmac<br />FEC MAC address: 0x00:0x1e:0xac:...|| test the presence of the MAC address in EEPROM/fuses <br /> the command bdinfo should return a valid mac address
+|'''Ethernet MAC''' || style="background:#00ff00;" | dm9000 read<br />00000000: 1e00 00ac|| style="background:#00ff00;" | bdinfo<br />...<br />ethaddr     = 00:1e:ac:... || style="background:#00ff00;" | bdinfo<br />...<br />ethaddr     = 00:1e:ac:... || style="background:#00ff00;" | iim read fecmac<br />FEC MAC address: 0x00:0x1e:0xac:...|| test the presence of the MAC address in EEPROM/fuses <br /> the command bdinfo should return a valid mac address
 |----------------
-|'''Default IP''' || style="background:#00ff00;" | ||  style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#ffff00;" | ||  the default IP variables should be:<br /> ipaddr=192.168.0.10<br /> netmask=255.255.255.0<br /> serverip=192.168.0.2<br /> gatewayip=192.168.0.1<br /> use the "flash_reset_env" script<br />to restore the default environment variables
+|'''Default IP''' || style="background:#00ff00;" | ||  style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#00ff00;" | ||  the default IP variables should be:<br /> ipaddr=192.168.0.10<br /> netmask=255.255.255.0<br /> serverip=192.168.0.2<br /> gatewayip=192.168.0.1<br /> use the "flash_reset_env" script<br />to restore the default environment variables
 |----------------
-|'''DHCP''' || style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#00ff00;" |  || style="background:#ffff00;" |  ||  the command "DHCP" should be able<br />to update IP environment variables according<br /> to your network and DHCP server
+|'''DHCP''' || style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#00ff00;" |  || style="background:#00ff00;" |  ||  the command "DHCP" should be able<br />to update IP environment variables according<br /> to your network and DHCP server
 |----------------
-|'''Ping''' || style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#00ff00;" |  || style="background:#ffff00;" | ||  set ipaddr & serverip according to your network.<br />Test the connection to the server: <br />ping ${serverip} should return the status "alive"
+|'''Ping''' || style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#00ff00;" |  || style="background:#00ff00;" | ||  set ipaddr & serverip according to your network.<br />Test the connection to the server: <br />ping ${serverip} should return the status "alive"
 |----------------
-|'''Board reset''' ||style="background:#00ff00;" | || style="background:#00ff00;" | ||  style="background:#00ff00;" | || style="background:#ffff00;" |  || command "reset" shall reset the board
+|'''Board reset''' ||style="background:#00ff00;" | || style="background:#00ff00;" | ||  style="background:#00ff00;" | || style="background:#00ff00;" |  || command "reset" shall reset the board
 |----------------
-|'''TFTP''' || style="background:#00ff00;" | || style="background:#00ff00;" |  || style="background:#00ff00;" |  || style="background:#ffff00;" | ||  the command "run download_uboot" should <br />UBoot from the host PC into the target RAM
+|'''TFTP''' || style="background:#00ff00;" | || style="background:#00ff00;" |  || style="background:#00ff00;" |  || style="background:#00ff00;" | ||  the command "run download_uboot" should <br />UBoot from the host PC into the target RAM
 |----------------
-|'''NFS''' || style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#00ff00;" |  || style="background:#ffff00;" | || the command <br />"nfs ${loadaddr} ${serverip}:/tftpboot/${board_name}-linux.bin" should download<br />linux kernel from the host PC into the target RAM
+|'''NFS''' || style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#00ff00;" |  || style="background:#00ff00;" | || the command <br />"nfs ${loadaddr} ${serverip}:/tftpboot/${board_name}-linux.bin" should download<br />linux kernel from the host PC into the target RAM
 |----------------
-|'''Board upgrade scripts''' ||style="background:#00ff00;" | || style="background:#00ff00;" | ||  style="background:#00ff00;" | || style="background:#ffff00;" |  || use the hereafter scripts to update the software of the board:<br /> run update_all<br />run flash_reset_env
+|'''Board upgrade scripts''' ||style="background:#00ff00;" | || style="background:#00ff00;" | ||  style="background:#00ff00;" | || style="background:#00ff00;" |  || use the hereafter scripts to update the software of the board:<br /> run update_all<br />run flash_reset_env
 |----------------
 |'''I2C''' || style="background:#00ff00;" | 38 76 7F || postponed || postponed || style="background:#ffff00;" | 00 13 1A ||  startup sceen shall display:<br />I2C:   ready<br />the command "i2c probe" should return the list<br />of devices on the i2c bus of the board
 |----------------
-|'''linux boot from flash''' || style="background:#00ff00;" |  || style="background:#00ff00;" | || style="background:#00ff00;" |  || style="background:#ffff00;" | ||  the command "boot" should start linux and rootfs from flash<br />the linux login should be "armadeus login: "
+|'''linux boot from flash''' || style="background:#00ff00;" |  || style="background:#00ff00;" | || style="background:#00ff00;" |  || style="background:#00ff00;" | ||  the command "boot" should start linux and rootfs from flash<br />the linux login should be "armadeus login: "
 |----------------
-|'''NFS boot (rootfs)''' || style="background:#00ff00;" | ||  style="background:#00ff00;" | || style="background:#00ff00;" |   || style="background:#ffff00;" | ||  http://www.armadeus.com/wiki/index.php?title=Nfs#Boot_from_NFS <br /> the command "run nfsboot" should start linux using <br />rootfs over a NFS shared drive on <br />your host server ${serverip}
+|'''NFS boot (rootfs)''' || style="background:#00ff00;" | ||  style="background:#00ff00;" | || style="background:#00ff00;" |   || style="background:#00ff00;" | ||  http://www.armadeus.com/wiki/index.php?title=Nfs#Boot_from_NFS <br /> the command "run nfsboot" should start linux using <br />rootfs over a NFS shared drive on <br />your host server ${serverip}
 |----------------
-|''' rootfs on SD/MMC''' || style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#ffff00;" |  ||  http://www.armadeus.com/wiki/index.php?title=MultiMediaCard#Booting_from_MMC.2FSD  <br /> the command "run mmcboot" should start linux using <br />a rootfs on your sd/mmc memory card
+|''' rootfs on SD/MMC''' || style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#00ff00;" |  ||  http://www.armadeus.com/wiki/index.php?title=MultiMediaCard#Booting_from_MMC.2FSD  <br /> the command "run mmcboot" should start linux using <br />a rootfs on your sd/mmc memory card
 |----------------
-|'''Flash lock/unlock''' || style="background:#00ff00;" | || Not Applicable ||  style="background:#00ff00;" | || style="background:#ffff00;" | ||  For APF9328: <br />protect on all<br />erase nor0,1 <br />-> - Warning: 1 protected sectors will not be erased!<br />protect off all<br />erase nor0,1 <br />-> no warning - erase done<br /> other apf boards:<br />nand lock; nand erase.part kernel<br />Should not erase the kernel partion<br />(error message, system hang or no message)<br />
+|'''Flash lock/unlock''' || style="background:#00ff00;" | || Not Applicable ||  style="background:#00ff00;" | || style="background:#00ff00;" | ||  For APF9328: <br />protect on all<br />erase nor0,1 <br />-> - Warning: 1 protected sectors will not be erased!<br />protect off all<br />erase nor0,1 <br />-> no warning - erase done<br /> other apf boards:<br />nand lock; nand erase.part kernel<br />Should not erase the kernel partion<br />(error message, system hang or no message)<br />
 boot linux<br />to confirm nand integrity -> kernel should start
 |----------------
-|'''Env compatibility change''' || style="background:#00ff00;" | ||  style="background:#00ff00;" | || style="background:#00ff00;" | ||  style="background:#ffff00;" | || force a new environment version and check <br />the warning on next reboot:<br />setenv env_version 0<br />saveenv<br />reset<br />=> *** Warning - Environment version change suggests:<br />run flash_reset_env; reset
+|'''Env compatibility change''' || style="background:#00ff00;" | ||  style="background:#00ff00;" | || style="background:#00ff00;" | ||  style="background:#00ff00;" | || force a new environment version and check <br />the warning on next reboot:<br />setenv env_version 0<br />saveenv<br />reset<br />=> *** Warning - Environment version change suggests:<br />run flash_reset_env; reset
 |----------------
-|'''FPGA control''' || style="background:#00ff00;" | blinking_led_<br />apf9328_200k.bit || Not Applicable  || style="background:#00ff00;" | blinking_led_<br />apf27_200k.bit || style="background:#ffff00;" | blinking_led_<br />apf51_lx9.bin ||   the command "fpga info 0" should indicate<br /> the presence of the spartan 3 <br />Test FPGA download with the blinking_led bit file of your board:<br />tftpboot ${loadaddr} blinking_led_apfxxxx_xxxk.bit<br />fpga load 0 ${loadaddr} ${filesize}<br /> should make the LED blinking without error
+|'''FPGA control''' || style="background:#00ff00;" | blinking_led_<br />apf9328_200k.bit || Not Applicable  || style="background:#00ff00;" | blinking_led_<br />apf27_200k.bit || style="background:#00ff00;" | blinking_led_<br />apf51_lx9.bin ||   the command "fpga info 0" should indicate<br /> the presence of the spartan 3 <br />Test FPGA download with the blinking_led bit file of your board:<br />tftpboot ${loadaddr} blinking_led_apfxxxx_xxxk.bit<br />fpga load 0 ${loadaddr} ${filesize}<br /> should make the LED blinking without error
 |----------------
-|'''Firmware autoload''' || style="background:#00ff00;" | || Not Applicable|| style="background:#00ff00;" |  || style="background:#ffff00;" |  ||  run flash_firmware<br />setenv firmware_autoload 1<br />saveenv<br /><power off>/<power on> the board<br />LED should blink after a couple of seconds and<br />UBoot should continue countdown to boot linux
+|'''Firmware autoload''' || style="background:#00ff00;" | || Not Applicable|| style="background:#00ff00;" |  || style="background:#00ff00;" |  ||  run flash_firmware<br />setenv firmware_autoload 1<br />saveenv<br /><power off>/<power on> the board<br />LED should blink after a couple of seconds and<br />UBoot should continue countdown to boot linux
 |----------------
 |'''imxfuse commands''' || Not Applicable || style="background:#00ffff;" | ocotp  || style="background:#ffff00;" | imxfuse mac... || style="background:#ffff00;" | iim blow fecmac... || Use production tool to blow a MAC address
 |----------------
-|'''Detect RAM SIze''' || not supported || style="background:#00ff00;" | 128MiB || style="background:#00ff00;" | Board rev. 1 with 128 MiB || style="background:#ffff00;" |  Board rev. 1 with 512MiB || Using the default UBoot config test the given<br /> config is correct during boot
+|'''Detect RAM SIze''' || not supported || style="background:#00ff00;" | 128MiB || style="background:#00ff00;" | Board rev. 1 with 128 MiB || style="background:#00ff00;" |  Board rev. 1 with 512MiB || Using the default UBoot config test the given<br /> config is correct during boot
 |----------------
 |'''PAR cleared''' || style="background:#00ff00;" | || Not Applicable || style="background:#00ff00;" | || Not Applicable ||   run unlock_regs; boot<br />once logged on linux try the command<br />imxregs CSR<br />should display imx register value instead of any error like "Unhandled fault"