Difference between revisions of "APF6 SP The full howto"
From ArmadeusWiki
(→Introduction) |
|||
Line 19: | Line 19: | ||
= howto = | = howto = | ||
− | == | + | To install quartus 15 see [[Quartus_installation_on_Linux#Version_15.1_prime_lite | this page]]. |
+ | |||
+ | == Make the project == | ||
+ | |||
+ | * Open the new project wizard in Quartus | ||
+ | * Select a directory for the design: | ||
+ | <pre class="config"> | ||
+ | ~/tmp/apf6_the_full_howto | ||
+ | </pre> | ||
+ | * Open an empty project | ||
+ | * Change the device : right click on "Cyclone V"->'''Devices...''' in Project Navigator | ||
+ | * Select the part number : '''5CGXFC4C7U19C8''' then '''Ok''' | ||
+ | * Open Qsys: '''Tools'''->'''Qsys''' |
Revision as of 17:34, 1 February 2016
Introduction
This is the full howto to make an APF6_SP CycloneV example design to use :
- PCIe
- DDR3
- LED
- Button
This howto is designed for :
- APF6D_SP-M1GE4G-4m-BW-C4M384: APF6_SP Dual with CycloneV C4 (speed C8) and two DDR3 chips
- Quartus 15.1.1 : Quartus 15 with update 1
howto
To install quartus 15 see this page.
Make the project
- Open the new project wizard in Quartus
- Select a directory for the design:
~/tmp/apf6_the_full_howto
- Open an empty project
- Change the device : right click on "Cyclone V"->Devices... in Project Navigator
- Select the part number : 5CGXFC4C7U19C8 then Ok
- Open Qsys: Tools->Qsys