Difference between revisions of "Talk:JTAG"
From ArmadeusWiki
(Created page with "==OpenOCD 0.10 Installation== With latest processors/boards (starting from APF6/i.MX6), you might need a recent version of OpenOCD (by default debian still install 0.8 one): =...") |
(No difference)
|
Latest revision as of 17:39, 3 June 2016
OpenOCD 0.10 Installation
With latest processors/boards (starting from APF6/i.MX6), you might need a recent version of OpenOCD (by default debian still install 0.8 one):
libftdi
libftdi is needed for Amontec JTAGkey.
If cmake is not already installed on your PC then do it:
$ sudo apt-get install cmake
then:
$ wget http://www.intra2net.com/en/developer/libftdi/download/libftdi1-1.3.tar.bz2 $ tar jxvf libftdi1-1.3.tar.bz2 $ cd libftdi1-1.3 $ mkdir build $ cd build $ cmake -DCMAKE_INSTALL_PREFIX="/usr" ../ $ make $ sudo make install
openocd from git
$ git clone git://git.code.sf.net/p/openocd/code openocd.git $ ./bootstrap $ ./configure (./configure --enable-legacy-ft2232_libftdi ???) $ make $ sudo make install
