Difference between revisions of "U-Boot-2011.12"
From ArmadeusWiki
(Test Firmware autoload sur apf51) |
(Test "Rootfs on SD/mmc" is OK on apf51) |
||
| Line 78: | Line 78: | ||
|'''NFS boot (rootfs)''' || style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#ffff00;" | || style="background:#00ff00;" | || http://www.armadeus.com/wiki/index.php?title=Nfs#Boot_from_NFS <br /> the command "run nfsboot" should start linux using rootfs over a NFS shared drive on your host server ${serverip} | |'''NFS boot (rootfs)''' || style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#ffff00;" | || style="background:#00ff00;" | || http://www.armadeus.com/wiki/index.php?title=Nfs#Boot_from_NFS <br /> the command "run nfsboot" should start linux using rootfs over a NFS shared drive on your host server ${serverip} | ||
|---------------- | |---------------- | ||
| − | |''' rootfs on SD/MMC''' || style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#ffff00;" | || style="background:# | + | |''' rootfs on SD/MMC''' || style="background:#00ff00;" | || style="background:#00ff00;" | || style="background:#ffff00;" | || style="background:#00ff00;" | || http://www.armadeus.com/wiki/index.php?title=MultiMediaCard#Booting_from_MMC.2FSD <br /> the command "run mmcboot" should start linux using a rootfs on your sd/mmc memory card |
|---------------- | |---------------- | ||
|'''Flash lock/unlock''' || style="background:#00ff00;" | || postponed || style="background:#ffff00;" | || postponed || For APF9328: <br />protect on all<br />erase ${env_addr} +${env_len} -> - Warning: 1 protected sectors will not be erased!<br />protect off all<br />erase ${env_addr} +${env_len} -> no warning - erase done<br /> other apf boards:<br />todo | |'''Flash lock/unlock''' || style="background:#00ff00;" | || postponed || style="background:#ffff00;" | || postponed || For APF9328: <br />protect on all<br />erase ${env_addr} +${env_len} -> - Warning: 1 protected sectors will not be erased!<br />protect off all<br />erase ${env_addr} +${env_len} -> no warning - erase done<br /> other apf boards:<br />todo | ||
Revision as of 20:32, 14 March 2012
Activation
- Change the version of U-Boot to use U-Boot-2011.12
$ make menuconfig
Bootloaders --->
($(BR2_BOARD_NAME)) U-Boot board name
($(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-u-boot-2011.12.h) U-Boot header file
U-Boot Version (Custom tarball) --->
(ftp://ftp.denx.de/pub/u-boot/u-boot-2011.12.tar.bz2) URL of custom U-Boot tarball
(../patches/u-boot/2011.12) custom patch dir
TODO list
Features/Status
| Status | Legend Color |
| Test passed | |
| Compilation or runtime test failed | |
| To be tested | |
| Optional/not activated by default | |
| NA/not supported |
| Feature | Status | Test case | |||
|---|---|---|---|---|---|
| boards | apf9328 | apf28 | apf27 | apf51 | |
| U-Boot power on | U-Boot 2011.12... I2C: ready DRAM: 16 MiB Flash: 8 MiB In: serial Out: serial Err: serial Net: dm9000 |
U-Boot 2011.12... Freescale i.MX28 family DRAM: 128 MiB NAND: 256 MiB MMC: MXS MMC: 0 In: serial Out: serial Err: serial Net: FEC0 |
U-Boot 2011.12... | U-Boot 2011.12... I2C: ready DRAM: 256-512 MiB NAND: 512 MiB In: serial Out: serial Err: serial Net: FEC |
power on the board and check the boot log of the board |
| NOR/NAND flash | 8 MiB | 256MiB-2GiB | 256MiB-2GiB | 512MiB-4GiB | startup sceen shall display: Flash: xx MiB |
| RAM | 16/32 MiB | 128MiB-512MiB | 64-256MiB | 256-512MiB | startup sceen shall display: DRAM: 16 MiB |
| Ethernet driver | dm9000 | FEC0 | FEC | startup sceen shall display: Net: <DRIVER> | |
| Ethernet MAC | dm9000 read 00000000: 1e00 00ac |
bdinfo ... ethaddr = 00:1e:ac:... |
iim read fecmac FEC MAC address: 0x00:0x1e:0xac:... |
test the presence of the MAC address in EEPROM/fuses the command bdinfo should return a valid mac address | |
| Default IP | the default IP variables should be: ipaddr=192.168.0.10 netmask=255.255.255.0 serverip=192.168.0.2 gatewayip=192.168.0.1 use the "flash_reset_env" script to restore the default environment variables | ||||
| DHCP | the command "DHCP" should be able to update IP environment variables according to your network and DHCP server | ||||
| Ping | set ipaddr & serverip according to your network. Test the connection to the server: ping ${serverip} should return the status "alive" | ||||
| Board reset | command "reset" shall reset the board | ||||
| TFTP | the command "run download_uboot" should UBoot from the host PC into the target RAM | ||||
| NFS | the command "nfs ${loadaddr} ${serverip}:/tftpboot/${board_name}-linux.bin" should download linux kernel from the host PC into the target RAM | ||||
| Board upgrade scripts | use the hereafter scripts to update the software of the board: run update_all run flash_reset_env | ||||
| I2C | 38 76 7F | not supported | 00 13 1A | startup sceen shall display: I2C: ready the command "i2c probe" should return the list of devices on the i2c bus of the board | |
| linux boot from flash | the command "boot" should start linux and rootfs from flash the linux login should be "armadeus login: " | ||||
| NFS boot (rootfs) | http://www.armadeus.com/wiki/index.php?title=Nfs#Boot_from_NFS the command "run nfsboot" should start linux using rootfs over a NFS shared drive on your host server ${serverip} | ||||
| rootfs on SD/MMC | http://www.armadeus.com/wiki/index.php?title=MultiMediaCard#Booting_from_MMC.2FSD the command "run mmcboot" should start linux using a rootfs on your sd/mmc memory card | ||||
| Flash lock/unlock | postponed | postponed | For APF9328: protect on all erase ${env_addr} +${env_len} -> - Warning: 1 protected sectors will not be erased! protect off all erase ${env_addr} +${env_len} -> no warning - erase done other apf boards: todo | ||
| Env compatibility change | force a new environment version and check the warning on next reboot: setenv env_version 0 saveenv reset => *** Warning - Environment version change suggests: run flash_reset_env; reset | ||||
| FPGA control | blinking_led_ apf9328_200k.bit |
Not Applicable | blinking_led_ apf27_200k.bit |
blinking_led_ apf51_lx9.bin |
the command "fpga info 0" should indicate the presence of the spartan 3 Test FPGA download with the blinking_led bit file of your board: tftpboot ${loadaddr} blinking_led_apfxxxx_xxxk.bit fpga load 0 ${loadaddr} ${filesize} should make the LED blinking without error |
| Firmware autoload | Not Applicable | run flash_firmware setenv firmware_autoload 1 saveenv <power off>/<power on> the board LED should blink after a couple of seconds and UBoot should continue countdown to boot linux | |||
| imxfuse commands | Not Applicable | ||||
| PAR cleared | |||||
| NETCONSOLE | not supported | not supported | not supported | not supported | Ethernet_console |
| LCD | not supported | not supported | not supported | not supported | |
| SPI | not supported | not supported | not supported | not supported | |
| USB | not supported | not supported | not supported | not supported | |
