Difference between revisions of "WindowsInstall"
(→To keep your copy up-to-date within the armadeus tree) |
|||
| Line 27: | Line 27: | ||
Open a cygwin shell and follow this procedure: | Open a cygwin shell and follow this procedure: | ||
| − | + | ==Get Armadeus software== | |
$ svn co svn://ericjarrige.homelinux.org/armadeus/trunk armadeus --username <<YOUR USERNAME>> --password <<YOUR PASS>> | $ svn co svn://ericjarrige.homelinux.org/armadeus/trunk armadeus --username <<YOUR USERNAME>> --password <<YOUR PASS>> | ||
A directory named armadeus/ will be created on your hard-disk and will contain all the files you need. | A directory named armadeus/ will be created on your hard-disk and will contain all the files you need. | ||
| Line 33: | Line 33: | ||
If not, then download installation archive from SourceForge: http://sourceforge.net/projects/armadeus and detar it (tar -xvf filename). | If not, then download installation archive from SourceForge: http://sourceforge.net/projects/armadeus and detar it (tar -xvf filename). | ||
| − | + | ==Configure Armadeus software== | |
$ cd armadeus/ | $ cd armadeus/ | ||
$ make menuconfig (or just make the first time). | $ make menuconfig (or just make the first time). | ||
| Line 43: | Line 43: | ||
* Exit the configuration tool and save your config | * Exit the configuration tool and save your config | ||
| − | + | ==Launch build== | |
$ make | $ make | ||
The toolchain is built automatically. During this procedure, several files are downloaded from the web. Please wait for a while.... it takes at least one hour for the first run! | The toolchain is built automatically. During this procedure, several files are downloaded from the web. Please wait for a while.... it takes at least one hour for the first run! | ||
| Line 52: | Line 52: | ||
* compilation crash with linux 2.6.12: run make again | * compilation crash with linux 2.6.12: run make again | ||
| − | + | ==Enjoy the result== | |
The generated binary files can be found in the subdirectory armadeus/software/buildroot: | The generated binary files can be found in the subdirectory armadeus/software/buildroot: | ||
Revision as of 20:29, 22 September 2006
How-To install Armadeus Software Development Kit for Window$
The toolchain can also be built on a windows system. To do this, Cygwin (a Linux emulation tool) has to be installed first.
Contents
Prerequisites for Window$ installation
Install cygwin: http://www.cygwin.com Remark: do not delete the package folder (ftp%xxxx) otherwise the synchronization between the installed packages and the available ones will no more be done !
Choose the default installation (nothing to modify) and add the following packages by clicking one time on the "skip" icon:
- devel -> subversion
- devel -> make
- devel -> patchutils
- devel -> gcc-core
- devel -> gcc-g++
- devel -> gdb
- devel -> binutils
- devel -> libncurses-devel
- devel -> gettext-devel
- devel -> bison
- devel -> flex
- system -> util-linux
- web -> wget
Installation
Open a cygwin shell and follow this procedure:
Get Armadeus software
$ svn co svn://ericjarrige.homelinux.org/armadeus/trunk armadeus --username <<YOUR USERNAME>> --password <<YOUR PASS>>
A directory named armadeus/ will be created on your hard-disk and will contain all the files you need.
If not, then download installation archive from SourceForge: http://sourceforge.net/projects/armadeus and detar it (tar -xvf filename).
Configure Armadeus software
$ cd armadeus/ $ make menuconfig (or just make the first time).
This will launch the buildroot configuration. in Board Support Option menu, select your armadeus board (apf/apm9328), the RAM size (16/32MB) and so on...
- Choose GDB version 6.3 if you need a debugger
- If you need the LIBSTD C++, add this in the menuconfig/toolchain options/additional gcc options:
--disable-libstdcxx-pch. This will disable the use of the precompiler headers
- Exit the configuration tool and save your config
Launch build
$ make
The toolchain is built automatically. During this procedure, several files are downloaded from the web. Please wait for a while.... it takes at least one hour for the first run!
Known Problems
- compilation crash with uclibc-0.9.28: run make again
- compilation crash with gdb 6.3: run make again
- compilation crash with linux 2.6.12: run make again
Enjoy the result
The generated binary files can be found in the subdirectory armadeus/software/buildroot:
- u-boot.brec (can be used with the bootstrap, if U-Boot is not installed or not working, see BootLoader page)
- u-boot.bin (for download with uboot, see BootLoader "Update u-boot" page)
- linux-kernel-2.6.xx-arm.bin (for download with uboot, see InstallLinux)
- rootfs.arm_nfpu.jffs2 (for download with uboot, see InstallFileSystem?)
- rootfs.arm_nfpu.tar (for an nfsroot, see RootNFS?)
To keep your copy up-to-date within the armadeus tree
$ svn update
This will update your working directory to the latest release.
Note: if "svn update" fails because a directory or a file already exists, then do:
$ rm -rf <this-directory/file> $ svn update
You can do a:
$ make defconfig
to have the latest features automatically activated and a
$ make menuconfig
to set again your personnal parameters (SDRAM size...).
You have to do a make to rebuild binary files end then upload the binary files to your target.
Note: if definitively everything goes wrong while it worked before the last update. You can apply the following procedure:
$ rm -rf software/buildroot $ rm Makefile $ make $ make
