RS232 Terminal configuration

From ArmadeusWiki
Revision as of 18:54, 4 May 2011 by JulienB (Talk | contribs)

Jump to: navigation, search

Serial Terminal configuration

You will need a Serial terminal emulator to communicate with U-Boot/Linux console. You can choose between:

We suggest you to use Kermit as Terminal emulator. Minicom was sadly reported to have problems when communicating with U-Boot (ZModem data transfer). If you just need a simple serial console and not to transfer data through the serial link, then GTKTerm is the perfect choice ! (gtkterm package in Ubuntu)

Note Note: Your terminal should now be configured with: 115200 bauds 8N1 parameters