Communicate

From ArmadeusWiki
Revision as of 20:40, 27 September 2006 by Salocin68 (Talk | contribs) (Forewords)

Jump to: navigation, search

How-To connect the Armadeus Boards to your Host

Forewords

The default connection uses a simple RS232 link (crossover cable).
Note: if your Armadeus board is equipped with an ethernet controller, this link can be used to speed up the linux and rootfs downloads.
The RS232 tool (serial link) and TFTP tool (ethernet link) have to be configured according to your Host operating system.

Linux

Linux uBoot Connection

Window$

Windows uBoot Connection