Linux 2.6.23 integration

From ArmadeusWiki
Revision as of 23:09, 17 November 2007 by JulienB (Talk | contribs) (Drivers test summary)

Jump to: navigation, search

Generic

  • in in arch/arm/mach-imx/generic.c line 338, remove __init in void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info) otherwise kernel gives compilation warning:
WARNING: vmlinux.o(__ksymtab+0x3d8): Section mismatch: reference to .init.text:set_imx_fb_info (between '__ksymtab_set_imx_fb_info' and '__ksymtab_imx_get_usb_clk')
  • in arch/arm/mach-imx/apf9328.c line 28, config.h doesn't exist anymore
  • do some modifications in scripts/checksyscalls.sh to prevent "missing syscalls warning"

Serial

  • Serial registers Macros (like UFCR()) have been moved from imx-regs.h -> imx serial driver C file. So in apf9328.c we should remove these lines:
    // Serial
   UFCR(IMX_UART1_BASE) = 0xa81;
   UFCR(IMX_UART2_BASE) = 0xa81;

I2C

  • in drivers/i2c/busses/i2c-imx.c, SA_INTERRUPT is now obsolete and should be replaced by IRQF_DISABLED in request_irq() (line 575)
  • in drivers/i2c/busses/i2c-imx.h line 63, replace #define I2C_IMX_DEFAULT_CLKDIV 0x0f with #define I2C_IMX_DEFAULT_CLKDIV 16 otherwise it's giving error in driver compilation
  • in drivers/i2c/busses/i2c-imx.h line 104, struct i2c_algorithm doesn't have slave_send nor slave_recv anymore

MTD

  • in drivers/mtd/maps/apf9328.c line 28, consistent_sync() should be replaced by flush_ioremap_region() otherwise kernel is crashing (+adding of #include <asm/cacheflush.h>)

RTC

  • in drivers/rtc/rtc-ds1374.c line 59 dev_dbg(&client->dev, "%s: raw read data... should be commented otherwise not compiling

Backlight

  • struct backlight_properties backlight_device have changed backlight_operations was introduced
  • backlight_device_register() prototype has changed...

PWM

  • remove warnings in driver
  • use IRQF_DISABLE

Patches to remove ??

  • 012-linux-2.6.23.1-apm9328.diff

Problems encountered

Drivers test summary

Device Compiling ?
Static / Module
Working ? Comments
ADC NA OK OK
Backlight OK OK OK
CH7024 (Video Out) OK NA OK
DAC OK NA OK
Ethernet (DM9000) OK NA OK
FPGA PS/2 NT OK NT
LCD OK NA OK message starting PID 235, tty
MMC/SD OK NA MMC OK Linux boot on MMC Ok
PWM classic OK OK OK
PWM sound  ??? NT NT
RTC OK OK OK
Serial OK NA 0 -> OK, 1 -> NT
TSC2102 NA OK OK ts_test is not compiled :(
USB (gadget)  ??? NT NT
USB (host) NA OK OK
Watchdog NT NT NT