APF27

From ArmadeusWiki
Jump to: navigation, search

Description

The APF27 is a middle/high-end Single Board Computer targeted for low power applications, advanced GUI and extended connectivity.

Here is a list of the main features and options available on the APF27 and APF27dev:

Features/Options APF27 APF27dev Custom board
RAM: Mobile DDR 32 bits data bus 64, 128 or 256MB
Flash: Mobile NAND 256MB/16bits
Ethernet: 10/100Mbit with onboard Phy
USB: High speed USB OTG OTG with USB PHY
UART : 0 & 2 2 RS232 with transceiver
I2C Bus 2 1 bus I2C 2 with terminators
I2C EEPROM 2kbits EEPROM / bus I2C2
FPGA Xilinx Spartan 3A 62 GPIOs or custom features 62 GPIOs or custom features
USB: Full speed USB host 1 configurable USB FS GPIOs/USB FS/UART4
USB: High speed USB host 2 configurable GPIOs or USB HS GPIOs or USB HS
UART : 1, 3, 4, 5 configurable 4 RS232 or GPIOs 4 RS232 or GPIOs
bus I2C 1 configurable bus I2C 1 with terminators bus I2C or GPIOs
RTC - I2C RTC DS1374 -
DAC - I2C DAC MAX5821 -
bus SPI configurable 3 SPI buses 3 SPI buses or GPIOs
ADC - ADC MAX1027 / SPI -
CAN - CAN controller MCP2515 / SPI -
LCD interface & touchscreen configurable LCD 18 bits with 4 wires touchscreen interface LCD or GPIOs
Audio configurable TSC2102 in / out Audio or GPIOs
Video - HDMI / AD9889B controller -
SD/MMC configurable 1 SD/MMC card reader SD/MMC or GPIOs
PWM configurable 1 PWM or GPIO 1 PWM or GPIO
CSI configurable 1 CSI interface or GPIOs 1 CSI interface or GPIOs
Keypad configurable 1 keypad or GPIOs 1 keypad or GPIOs
User switch configurable 1 user switch user switch or GPIOs
User LED configurable 1 user LED user LED or GPIOs

Board summary:

  • Processor: Freescale i.MX27 (ARM9 @ 400MHz)
  • RAM: Mobile DDR. 64 to 256MB. 32 bits data bus. Default capacity will be either 64 or 128MB.
  • Flash: Mobile NAND. 256MB, 16 bits data bus.
  • Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link)
  • USB: High speed USB OTG (OnTheGo) with onboard Physical (ready to use USB OTG link)
  • USB: 1 High speed Host and 1 full speed USB Host ports (external PHY required)
  • RS232: onboard Physical (RS232 compatible interface)
  • FPGA: Xilinx Spartan 3A (50 to 400k gates, 200k default)
  • Supplies: high end DC/DC converters and LDOs on board. Only one external supply of 3.3V required.
  • Low power sleep mode (<10mW)
  • Mechanical dimensions: ~60x45mm

All the i.MX27 peripherals (LCD, 2xSDIO, 3xSPI, 6xSerial, I2C, CSI, 3xUSB, keypad, PWM, etc...) and the FPGA signals can be accessed through two high density Hirose connectors like on the APF9328 board.

The APF27 module can be plugged on the APF27Dev docking board or your own custom devt board.

Resources

Feature list

Video

Video Out

Video In

Wired communication

User Input

Storage

Other

FPGA