Difference between revisions of "APF27Dev"

From ArmadeusWiki
Jump to: navigation, search
(11 intermediate revisions by 4 users not shown)
Line 1: Line 1:
=Description=
+
[[Category: APF27]]
 +
[[Category: OPOS6UL_SP]]
 +
 
 +
==Description==
 
This is the Armadeus System's standard development board/baseboard for the [[APF27]] module.
 
This is the Armadeus System's standard development board/baseboard for the [[APF27]] module.
  
 
The following options are only populated on the "Full" version (APF27DevFull):
 
The following options are only populated on the "Full" version (APF27DevFull):
* [[DVI_/_HDMI]]
+
* [[DVI_/_HDMI|DVI/HDMI]]
 
* [[RTC]]
 
* [[RTC]]
 
* [[Controller_Area_Network|CAN Bus]]
 
* [[Controller_Area_Network|CAN Bus]]
 +
* ADC/DAC
  
 
+
==Errata==
=Errata=
+
* The APF27Dev DVI/HDMI output may not work correctly: due to a hardware issue on the Powerdown pin of the AD9889, the component may not work as expected (display not detected or going to sleep after some minutes).
* The DVI/HDMI may not work correctly: due to a harware issue on the Powerdown pin of the AD9889, the component may not work as expected.
+
 
** Solution: remove R43 and connect pin PD/A0 (23) to GND. You can place a short circuit over C76.
 
** Solution: remove R43 and connect pin PD/A0 (23) to GND. You can place a short circuit over C76.
 
** Consequence: the AD9889 can no more be placed in low power mode by hardware.
 
** Consequence: the AD9889 can no more be placed in low power mode by hardware.
[[Image:apf27devfull_hdmi_issue.png]]
+
[[Image:apf27devfull_hdmi_issue.PNG]]
  
 +
==Resources==
 +
* [[Datasheet | Datasheet and schema]]
 +
* [http://www.armadeus.com/english/products-development_boards-apf27_dev.html Product page on Armadeus Systems website]
  
=Resources=
+
==Feature list==
* product page: http://www.armadeus.com/english/products-development_boards-apf27_dev.html
+
* [[APF27 Linux kernel status]]
* schematics: http://www.armadeus.com/_downloads/apf27Dev/hardware/apf27_devfull_12.pdf
+
* datasheet: http://www.armadeus.com/_downloads/apf27Dev/documentation/DataSheet_APF27Dev.pdf
+
 
+
 
+
=Feature list=
+
  
 
{| border="0" cellpadding="5" cellspacing="5" summary="Hardware Add-Ons by functionnalities"
 
{| border="0" cellpadding="5" cellspacing="5" summary="Hardware Add-Ons by functionnalities"
Line 28: Line 29:
 
|
 
|
  
==Audio==
+
===Audio===
 
* [[TSC2101]]: audio in/out
 
* [[TSC2101]]: audio in/out
  
==Video==
+
===Video===
===Video Out===
+
====Video Out====
 
* [[LCD]]
 
* [[LCD]]
 
* [[BackLight]]
 
* [[BackLight]]
 
* [[FrameBuffer]]
 
* [[FrameBuffer]]
* [[DVI_/_HDMI]]
+
* [[DVI_/_HDMI|DVI/HDMI]]
  
===Video In===
+
====Video In====
*[[Camera_interface]]
+
*[[Camera interface]]
 
||
 
||
==User Input==
+
===User Input===
 
* [[Keypad]]
 
* [[Keypad]]
 
* [[TSC2101 |touchscreen]]
 
* [[TSC2101 |touchscreen]]
  
==Wired communication==
+
===Wired communication===
* [[Uart]]
+
* [[Uart|UART]]
 
* [[SPI]]
 
* [[SPI]]
 
* [[I2C]]
 
* [[I2C]]
* [[USB_Host]]  
+
* [[USB Host]]  
* [[CAN_bus_Linux_driver]]
+
* [[CAN_bus_Linux_driver|CAN bus]]
  
 
+
===Storage===
==Storage==
+
 
* [[MultiMediaCard]]
 
* [[MultiMediaCard]]
 
||
 
||
==Reatime==
+
===Realtime===
 
* [[RTC]]
 
* [[RTC]]
  
==Other==
+
===Other===
* [[ADC_max1027]]
+
* [[ADC_max1027|ADC (MAX1027)]]
* [[Max5821]]
+
* [[Max5821|DAC (MAX5821)]]
* [[PWM]]: PWM output J22 pin 4 (2.8V output if configured as output)
+
* [[PWM]]: PWM output is on J22 pin 4 <br>(2.8V output, if configured as output)
* [[GPIO_Driver]]
+
* [[GPIO Driver]]
 
* [[JTAG]]
 
* [[JTAG]]
  
==FPGA==
+
===FPGA===
* [[Using_FPGA]]
+
* [[Using FPGA]]
 
+
 
+
  
 
[[Category:DevelopmentBoards]]
 
[[Category:DevelopmentBoards]]
 
[[Category:Hardware]]
 
[[Category:Hardware]]

Revision as of 15:55, 29 April 2019


Description

This is the Armadeus System's standard development board/baseboard for the APF27 module.

The following options are only populated on the "Full" version (APF27DevFull):

Errata

  • The APF27Dev DVI/HDMI output may not work correctly: due to a hardware issue on the Powerdown pin of the AD9889, the component may not work as expected (display not detected or going to sleep after some minutes).
    • Solution: remove R43 and connect pin PD/A0 (23) to GND. You can place a short circuit over C76.
    • Consequence: the AD9889 can no more be placed in low power mode by hardware.

Apf27devfull hdmi issue.PNG

Resources

Feature list

Audio

Video

Video Out

Video In

User Input

Wired communication

Storage

Realtime

Other

FPGA