Difference between revisions of "APF27Dev"

From ArmadeusWiki
Jump to: navigation, search
(Cleanup page)
m (Feature list)
Line 36: Line 36:
  
 
====Video In====
 
====Video In====
*[[Camera_interface]]
+
*[[Camera interface]]
 
||
 
||
 
===User Input===
 
===User Input===
Line 43: Line 43:
  
 
===Wired communication===
 
===Wired communication===
* [[Uart]]
+
* [[Uart|UART]]
 
* [[SPI]]
 
* [[SPI]]
 
* [[I2C]]
 
* [[I2C]]
Line 58: Line 58:
 
* [[ADC_max1027|ADC (MAX1027)]]
 
* [[ADC_max1027|ADC (MAX1027)]]
 
* [[Max5821|DAC (MAX5821)]]
 
* [[Max5821|DAC (MAX5821)]]
* [[PWM]]: PWM output is on J22 pin 4 (2.8V output, if configured as output)
+
* [[PWM]]: PWM output is on J22 pin 4 <br>(2.8V output, if configured as output)
 
* [[GPIO Driver]]
 
* [[GPIO Driver]]
 
* [[JTAG]]
 
* [[JTAG]]

Revision as of 09:44, 12 October 2010

Description

This is the Armadeus System's standard development board/baseboard for the APF27 module.

The following options are only populated on the "Full" version (APF27DevFull):

Errata

  • The APF27Dev DVI/HDMI output may not work correctly: due to a hardware issue on the Powerdown pin of the AD9889, the component may not work as expected (display not detected or going to sleep after some minutes).
    • Solution: remove R43 and connect pin PD/A0 (23) to GND. You can place a short circuit over C76.
    • Consequence: the AD9889 can no more be placed in low power mode by hardware.

Apf27devfull hdmi issue.PNG

Resources

Feature list

Audio

Video

Video Out

Video In

User Input

Wired communication

Storage

Realtime

Other

FPGA