Difference between revisions of "APF27 PPS"

From ArmadeusWiki
Jump to: navigation, search
(New page: ==Description== This is the Armadeus System's standard development board/baseboard for the APF27 module. The following options are only populated on the "Full" version (APF27DevFull):...)
 
(Description)
Line 1: Line 1:
 
==Description==
 
==Description==
This is the Armadeus System's standard development board/baseboard for the [[APF27]] module.
+
This is the Armadeus System's development board/baseboard for the PPS module.
 
+
This board is use to implement and securize network applications.
The following options are only populated on the "Full" version (APF27DevFull):
+
* [[DVI_/_HDMI]]
+
* [[RTC]]
+
* [[Controller_Area_Network|CAN Bus]]
+
  
 
==Errata==
 
==Errata==

Revision as of 15:01, 30 November 2010

Description

This is the Armadeus System's development board/baseboard for the PPS module. This board is use to implement and securize network applications.

Errata

  • The APF27Dev DVI/HDMI output may not work correctly: due to a hardware issue on the Powerdown pin of the AD9889, the component may not work as expected (display not detected or going to sleep after some minutes).
    • Solution: remove R43 and connect pin PD/A0 (23) to GND. You can place a short circuit over C76.
    • Consequence: the AD9889 can no more be placed in low power mode by hardware.

Apf27devfull hdmi issue.PNG

Resources

Feature list

Audio

Video

Video Out

Video In

User Input

Wired communication

Storage

Realtime

Other

FPGA