Difference between revisions of "APF28"

From ArmadeusWiki
Jump to: navigation, search
(Description)
Line 3: Line 3:
  
 
Here is a list of the main features:
 
Here is a list of the main features:
* Processor: [http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX286] (ARM9 @ 454MHz)
+
* Processor: [http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX286 iMX28x] (ARM9 @ 454MHz)
 
* RAM: DDR2 400. 64 to 512MB. 16 bits data bus. Default capacity is 128MB.
 
* RAM: DDR2 400. 64 to 512MB. 16 bits data bus. Default capacity is 128MB.
 
* Flash: NAND. 256MB to 4GB, 8 bits data bus. Default capacity is 256MB
 
* Flash: NAND. 256MB to 4GB, 8 bits data bus. Default capacity is 256MB

Revision as of 16:08, 17 January 2012

Description

The APF28 is a simple and low cost Single Board Computer targeted for small GUI, communication and control process.

Here is a list of the main features:

  • Processor: iMX28x (ARM9 @ 454MHz)
  • RAM: DDR2 400. 64 to 512MB. 16 bits data bus. Default capacity is 128MB.
  • Flash: NAND. 256MB to 4GB, 8 bits data bus. Default capacity is 256MB
  • Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link)
  • USB: High speed USB OTG (OnTheGo) with onboard Physical
  • USB: 1 High speed Hosts with integrated PHY
  • Touchscreen controler (4/5 wires)
  • Low speed ADCs (up to 7)
  • High speed ADC
  • RTC and Watchdog
  • Battery charger (Li-On/Li-Po)
  • Supplies: high end DC/DC converters and LDOs on board. Only one external supply required (5V, batterie or 3.3V).
  • Mechanical dimensions: ~43x25mm

All the i.MX28 peripherals (LCD, 2xSDIO, 2xSPI, 6xSerial, I2C, CSI, 3xUSB, keypad, PWM, etc...) can be accessed through two high density Hirose connectors.

Resources

Feature list

Video

Video Out

Video In

Wired communication

User Input

Storage

Other

  • PWM: PWM output J2 pin 18 (2.8V output level if used)
  • GPIO_Driver
  • APF51_PMIC (Touchscreen, RTC, LEDs, GPIOs, ADCs, Battery)

FPGA