Difference between revisions of "APF28"

From ArmadeusWiki
Jump to: navigation, search
(→‎Resources)
(Update extension connector default pinout)
Line 23: Line 23:
 
* [[Datasheet | Datasheet and schema]]
 
* [[Datasheet | Datasheet and schema]]
  
−
* Default pin usage of the extension connectors J9 and J10 - Each functionality can be disabled simply using "make linux-menuconfig" (implementation on-going)
+
==Extension connectors==
 +
Default pin usage on the extension connectors J9 and J10 - Each functionality can be disabled by simply using "make linux-menuconfig" (implementation on-going)
  
−
* Connector J9
+
** Connector J9
 
{| class="wikitable" border="1" cellpadding="5" summary="APF comparaison table"
 
{| class="wikitable" border="1" cellpadding="5" summary="APF comparaison table"
 
|- style="background:#efefef;"
 
|- style="background:#efefef;"
Line 32: Line 33:
 
| 1 || 3.3V || 2 || 5V
 
| 1 || 3.3V || 2 || 5V
 
|-
 
|-
−
| 3 || PWM6 (SAIF) || 4 || GND  
+
| 3 || SAIF0-SDATA0 / PWM6 || 4 || GND  
 
|-
 
|-
−
| 5 || PWM5 || 6 || PWM7 (SAIF)
+
| 5 || SAIF0-BITCLK /  PWM5 || 6 || SAIF1-SDATA0 /  PWM7
 
|-
 
|-
−
| 7 || PWM3 || 8 || PWM4  
+
| 7 || SAIF0-LRCLK /  PWM3 || 8 || SAIF0-MCLK /  PWM4
 
|-
 
|-
 
| 9 || GND || 10 || GND  
 
| 9 || GND || 10 || GND  
 
|-
 
|-
−
| 11 || UART3 || 12 || UART2
+
| 11 || UART3_RX || 12 || UART2_RX
 
|-
 
|-
−
| 13 || UART3 || 14 || UART2
+
| 13 || UART3_TX|| 14 || UART2_TX
 
|-
 
|-
−
| 15 || UART3 || 16 || i2c1 (SAIF)
+
| 15 || UART3_RTS || 16 || UART2_RTS
 
|-
 
|-
−
| 17 || UART3 || 18 || i2c1 (SAIF)
+
| 17 || UART3_CTS || 18 || UART2_CTS
 
|-
 
|-
 
| 19 || GND || 20 || GND  
 
| 19 || GND || 20 || GND  
 
|-
 
|-
−
| 21 || UART0 || 22 || GPIO
+
| 21 || UART0_RX || 22 || GPIO
 
|-
 
|-
−
| 23 || UART0 || 24 || GPIO
+
| 23 || UART0_TX || 24 || GPIO
 
|-
 
|-
−
| 25 || UART0 || 26 || PWM1
+
| 25 || UART0_RTS || 26 || GPIO / PWM1
 
|-
 
|-
−
| 27 || UART0 || 28 || PWM0
+
| 27 || UART0_CTS || 28 || GPIO / PWM0
 
|-
 
|-
 
| 29 || GND || 30 || GND  
 
| 29 || GND || 30 || GND  
 
|-
 
|-
−
| 31 || GPIO || 32 || GPIO
+
| 31 || GPIO || 32 || CAN1_TX
 
|-
 
|-
−
| 33 || GPIO || 34 || GPIO (SAIF)
+
| 33 || GPIO || 34 || CAN1_RX
 
|-
 
|-
 
| 35 || GPIO || 36 || GPIO  
 
| 35 || GPIO || 36 || GPIO  
Line 72: Line 73:
  
  
−
* Connector J10
+
** Connector J10
 
{| class="wikitable" border="1" cellpadding="5" summary="APF comparaison table"
 
{| class="wikitable" border="1" cellpadding="5" summary="APF comparaison table"
 
|- style="background:#efefef;"
 
|- style="background:#efefef;"
Line 79: Line 80:
 
| 1 || 3.3V || 2 || 5V
 
| 1 || 3.3V || 2 || 5V
 
|-
 
|-
−
| 3 || GPIO (SD) || 4 || VBAT  
+
| 3 || GPIO || 4 || VBAT  
 
|-
 
|-
−
| 5 || GPIO (SD) || 6 || GPIO (SD)
+
| 5 || GPIO || 6 || GPIO
 
|-
 
|-
−
| 7 || GPIO (SD) || 8 || GPIO (SD)
+
| 7 || GPIO || 8 || GPIO
 
|-
 
|-
−
| 9 || GPIO (SD) || 10 || GPIO  
+
| 9 || GPIO || 10 || GPIO  
 
|-
 
|-
 
| 11 || GND || 12 || GPIO  
 
| 11 || GND || 12 || GPIO  
 
|-
 
|-
−
| 13 || GND || 14 || SPI3
+
| 13 || GND || 14 || SPI3_SCK
 
|-
 
|-
−
| 15 || GND || 16 || SPI3
+
| 15 || GND || 16 || SPI3_MOSI
 
|-
 
|-
−
| 17 || GND || 18 || SPI3
+
| 17 || GND || 18 || SPI3_MISO
 
|-
 
|-
−
| 19 || SPI2 || 20 || SPI3
+
| 19 || SPI2_SCK || 20 || SPI3_SS0
 
|-
 
|-
−
| 21 || SPI2 || 22 || GND
+
| 21 || SPI2_MOSI || 22 || GND
 
|-
 
|-
−
| 23 || SPI2 || 24 || SPDIF
+
| 23 || SPI2_MISO || 24 || SPDIF
 
|-
 
|-
−
| 25 || SPI2 || 26 || GPIO
+
| 25 || SPI2_SS0 || 26 || GPIO
 
|-
 
|-
−
| 27 || GPIO (SD) || 28 || i2c0
+
| 27 || GPIO || 28 || I2C0_SDA
 
|-
 
|-
−
| 29 || GPIO (SD) || 30 || i2c0
+
| 29 || GPIO || 30 || i2C0_SCL
 
|-
 
|-
 
| 31 || 3.3V || 32 || GND
 
| 31 || 3.3V || 32 || GND

Revision as of 16:11, 25 May 2012

Description

The APF28 is a simple and low cost Single Board Computer targeted for small GUI, communication and control process.

Here is a list of the main features:

  • Processor: i.MX28x (ARM9 @ 454MHz)
  • RAM: DDR2 400. 64 to 512MB. 16 bits data bus. Default capacity is 128MB.
  • Flash: NAND. 256MB to 4GB, 8 bits data bus. Default capacity is 256MB
  • Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link)
  • USB: High speed USB OTG (OnTheGo) with onboard Physical
  • USB: 1 High speed Hosts with integrated PHY
  • Touchscreen controler (4/5 wires)
  • Low speed ADCs (up to 7)
  • High speed ADC
  • RTC and Watchdog
  • Battery charger (Li-On/Li-Po)
  • Supplies: high end DC/DC converters and LDOs on board. Only one external supply required (5V, batterie or 3.3V).
  • Mechanical dimensions: ~43x25mm

All the i.MX28 peripherals (LCD, SDIO, SPI, 6xSerial, I2C, 2xUSB, PWM, etc...) can be accessed through two high density Hirose connectors.

Resources

Extension connectors

Default pin usage on the extension connectors J9 and J10 - Each functionality can be disabled by simply using "make linux-menuconfig" (implementation on-going)

    • Connector J9
J9 Pin Function J9 Pin Function
1 3.3V 2 5V
3 SAIF0-SDATA0 / PWM6 4 GND
5 SAIF0-BITCLK / PWM5 6 SAIF1-SDATA0 / PWM7
7 SAIF0-LRCLK / PWM3 8 SAIF0-MCLK / PWM4
9 GND 10 GND
11 UART3_RX 12 UART2_RX
13 UART3_TX 14 UART2_TX
15 UART3_RTS 16 UART2_RTS
17 UART3_CTS 18 UART2_CTS
19 GND 20 GND
21 UART0_RX 22 GPIO
23 UART0_TX 24 GPIO
25 UART0_RTS 26 GPIO / PWM1
27 UART0_CTS 28 GPIO / PWM0
29 GND 30 GND
31 GPIO 32 CAN1_TX
33 GPIO 34 CAN1_RX
35 GPIO 36 GPIO
37 GND 38 GPIO
39 GND 40 GND


    • Connector J10
J10 Pin Function J10 Pin Function
1 3.3V 2 5V
3 GPIO 4 VBAT
5 GPIO 6 GPIO
7 GPIO 8 GPIO
9 GPIO 10 GPIO
11 GND 12 GPIO
13 GND 14 SPI3_SCK
15 GND 16 SPI3_MOSI
17 GND 18 SPI3_MISO
19 SPI2_SCK 20 SPI3_SS0
21 SPI2_MOSI 22 GND
23 SPI2_MISO 24 SPDIF
25 SPI2_SS0 26 GPIO
27 GPIO 28 I2C0_SDA
29 GPIO 30 i2C0_SCL
31 3.3V 32 GND
33 GND 34 GND
35 LRADC6 36 LRADC1
37 HSADC 38 LRADC0
39 GND 40 GND

Feature list

Video Out

Wired communication

Storage

Other
Retrieved from "http://www.armadeus.org/wiki/index.php?title=APF28&oldid=10920"