APF51

Description

The APF51 is a high-end Single Board Computer targeted for advanced GUI, intensive computation and extended connectivity.

Here is a list of the main features:

• Processor: Freescale i.MX51 (Cortex-A8 @ 800MHz)
• RAM: Mobile DDR. 64 to 512MB. 32 bits data bus. Default capacity will be 128MB or 256MB.
• Flash: Mobile NAND. 512MB, 8 bits data bus.
• Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link)
• USB: High speed USB OTG (OnTheGo) with onboard Physical (ready to use USB OTG link)
• USB: 2 High speed Hosts with integrated PHY
• RS232: onboard Physical (RS232 compatible interface)
• FPGA: Xilinx Spartan 6
• Supplies: high end DC/DC converters and LDOs on board. Only one external supply of 3.3V required.
• Low power sleep mode
• Mechanical dimensions: ~00x00mm (TBD)

All the i.MX51 peripherals (LCD, 2xSDIO, 3xSPI, 6xSerial, I2C, CSI, 3xUSB, keypad, PWM, etc...) and the FPGA signals can be accessed through two high density Hirose connectors.

Resources

• TBD

Feature list

Video Video Out LCD BackLight FrameBuffer Video In Camera_interface

Wired communication Uart SPI I2C USB_Host USB_Gadget User Input Keypad

Storage MultiMediaCard Other PWM: PWM output J2 pin 18 (2.8V output level if used) GPIO_Driver FPGA Using_FPGA