Difference between revisions of "C38A"
From ArmadeusWiki
(New page: This article explain how to use camera [http://www.lextronic.fr/P1730-camera-numerique-c38a.html C38A] (ov7620) with apf9328. The pinout of the kit is as following : {| border="0" cellpad...) |
|||
| Line 1: | Line 1: | ||
| − | This article explain how to use camera [http://www.lextronic.fr/P1730-camera-numerique-c38a.html C38A] (ov7620) with apf9328. The pinout of the kit is as following : | + | This article explain how to use camera [http://www.lextronic.fr/P1730-camera-numerique-c38a.html C38A] (ov7620) with apf9328. |
| + | |||
| + | == Pinout == | ||
| + | |||
| + | The pinout of the kit is as following : | ||
{| border="0" cellpadding="5" cellspacing="0" summary="FPGA IMR" | {| border="0" cellpadding="5" cellspacing="0" summary="FPGA IMR" | ||
| Line 14: | Line 18: | ||
| PIN || 1 || 3 || 5 || 7 || 9 || 11 || 13 || 15 || 17|| 19 || 21 || 23 || 25 || 27 || 29 || 31 | | PIN || 1 || 3 || 5 || 7 || 9 || 11 || 13 || 15 || 17|| 19 || 21 || 23 || 25 || 27 || 29 || 31 | ||
|} | |} | ||
| + | |||
| + | == Powering == | ||
| + | |||
| + | The C38A is 5V powered, it's not a great problem to power the module at this voltage. But the problem is for I/O, because all apf I/O are 3.3V signals. To solve this problem, the chip used in C38A provide a IO VDD power entry that can be powered both 5V or 3.3V. By default on C38A kit, all alimentation are connected to 5V. To provide 3.3V on IO alimentation (DOVDD) JP2 strap on kit must be deconnected, and 3.3V must be branched on J6 (DOVDD). | ||
Revision as of 19:52, 27 September 2008
This article explain how to use camera C38A (ov7620) with apf9328.
Pinout
The pinout of the kit is as following :
| C38A pinout | ||||||||||||||||
| PIN | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 | 26 | 28 | 30 | 32 |
| Y1 | Y3 | Y5 | Y7 | RST | FODD | HREF | VSYN | PCLK | VCC | VCC | UV1 | UV3 | UV5 | UV7 | VTO | |
| Y0 | Y2 | Y4 | Y6 | PWDN | SDA | SCL | AGND | AGND | EXCLK | AGND | UV0 | UV2 | UV4 | UV6 | GND | |
| PIN | 1 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 17 | 19 | 21 | 23 | 25 | 27 | 29 | 31 |
Powering
The C38A is 5V powered, it's not a great problem to power the module at this voltage. But the problem is for I/O, because all apf I/O are 3.3V signals. To solve this problem, the chip used in C38A provide a IO VDD power entry that can be powered both 5V or 3.3V. By default on C38A kit, all alimentation are connected to 5V. To provide 3.3V on IO alimentation (DOVDD) JP2 strap on kit must be deconnected, and 3.3V must be branched on J6 (DOVDD).
