Difference between revisions of "Camera interface"
From ArmadeusWiki
m (→Links) |
m (→Hardware) |
||
| Line 6: | Line 6: | ||
==Hardware== | ==Hardware== | ||
* All the signals of the i.MX27 CSI interface can be found on the J9 connector of the APF27Dev development board. | * All the signals of the i.MX27 CSI interface can be found on the J9 connector of the APF27Dev development board. | ||
| − | * You should connect an external camera compatible with the CSI interface (8bits data) to see something ;-). Here are the tested sensor models: | + | * You should connect an external camera compatible with the CSI interface (8bits data bus) to see something ;-). Here are the tested sensor models: |
** [[OV9653]] | ** [[OV9653]] | ||
| + | ** [[OV7640]] | ||
==Driver== | ==Driver== | ||
Revision as of 18:11, 20 April 2010
Page under construction...
Informations on this page are not guaranteed !!
On this page you will find useful informations on how to use the Camera/CMOS Sensor Interface (CSI) of the i.MX chip found on your APF board. Currently only the i.MX27/APF27 are supported.
Contents
Hardware
- All the signals of the i.MX27 CSI interface can be found on the J9 connector of the APF27Dev development board.
- You should connect an external camera compatible with the CSI interface (8bits data bus) to see something ;-). Here are the tested sensor models:
Driver
- From now we consider that you have a supported camera module plugged on you development board
- CSI interface can be driven through the V4L2 (Video For Linux) standard interface as soon as CSI driver is loaded:
# modprobe mx27_camera
- Then you have to load your camera driver in order for him to "attach" to the CSI one (for example for the OV9653):
# modprobe ov96xx
- Now it's up to you to configure your camera with the tools/API the camera driver is offering...
