Difference between revisions of "DVI / HDMI"
From ArmadeusWiki
m (→Quick HDMI test) |
(→Driver installation) |
||
| Line 2: | Line 2: | ||
==Driver installation== | ==Driver installation== | ||
| + | * Starting from armadeus-3.2 release or in recent GIT checkout the needed driver is installed by default. So the following is only kept here for information. | ||
<pre class="host"> | <pre class="host"> | ||
$ make linux26-menuconfig | $ make linux26-menuconfig | ||
| Line 27: | Line 28: | ||
</pre> | </pre> | ||
| − | Update the | + | Update the [[APF27]] board with the new Linux kernel and rootfs. |
==Usage== | ==Usage== | ||
Revision as of 00:44, 19 November 2009
How to use the HDMI/DVI output of the APF27DevFull development boards.
Driver installation
- Starting from armadeus-3.2 release or in recent GIT checkout the needed driver is installed by default. So the following is only kept here for information.
$ make linux26-menuconfig
Device Drivers--->
Multimedia devices --->
<*> Video For Linux
[ ] Enable Video For Linux API 1
< > DVB for Linux
*** Multimedia drivers ***
[ ] Load and attach frontend ...
[ ] Customize analog and hybrid ...
[*] Video capture adapters --->
[ ] Autoselect pertinent encoders/decoders ...
Encoders/decoders and other helper chips --->
<M> Analog Devices AD9889 digital video encoders (NEW)
[ ] V4L USB devices
[ ] Radio adapters
$ make
Update the APF27 board with the new Linux kernel and rootfs.
Usage
- load the module:
modprobe ad9889
Quick DVI test
Connect a HDMI to DVI cable between the afp27devfull board and your PC monitor. The Linux console must appear on the PC display.
Quick HDMI test
HDMI support has not been tested yet.
