Difference between revisions of "Development boards power supply"
From ArmadeusWiki
(→APF51) |
(→APF28) |
||
| Line 31: | Line 31: | ||
* Use +7V DC to +16V DC input voltage (standard DC jack input) | * Use +7V DC to +16V DC input voltage (standard DC jack input) | ||
* please see APF28Dev [http://www.armadeus.com/_downloads/apf28_Dev/documentation/ Datasheet] for details. | * please see APF28Dev [http://www.armadeus.com/_downloads/apf28_Dev/documentation/ Datasheet] for details. | ||
| + | |||
| + | ==APF6/APF6SP == | ||
| + | |||
| + | === APF6_Dev === | ||
| + | |||
| + | * Use +7V DC to +16V DC input voltage (standard DC jack input) | ||
| + | * please see APF6Dev [http://www.armadeus.com/_downloads/apf6Dev/documentation/ Datasheet] for details. | ||
==Links== | ==Links== | ||
[[Build your own battery pack for your APF]] | [[Build your own battery pack for your APF]] | ||
Latest revision as of 09:13, 1 July 2015
 |
Warning: For all development boards: + is in the middle of the connector, - on the side. Use a regulated power supply capable of providing at least 500mA at minimum required voltage. |
Contents
APF9328
DevLight V1
- Use +5V DC to +9V DC input voltage
DevLight V2
- Use +5V DC to +7V DC input voltage
DevFull
- Use +7V DC to +24V DC input voltage
APF27
DevLight & DevFull
- Use +6V DC to +16V DC input voltage
PPS
- Use +8V DC to +24V DC input voltage
- or USB OTG connector (J3)
APF51
APF51Dev
- Use +8V DC to +28V DC input voltage (standard DC jack input)
- or Li-Po/Li-ion batterie (3.7 or 3.6V) input (J11). Some peripherals will not be powered (please see APF51Dev Datasheet for details)
- or USB OTG connector (J3). In this case some peripherals will not be powered (please see APF51Dev Datasheet for details)
APF28
APF28Dev
- Use +7V DC to +16V DC input voltage (standard DC jack input)
- please see APF28Dev Datasheet for details.
APF6/APF6SP
APF6_Dev
- Use +7V DC to +16V DC input voltage (standard DC jack input)
- please see APF6Dev Datasheet for details.
