Difference between revisions of "Ethernet console"
From ArmadeusWiki
(→Linux) |
m (→Links) |
||
| Line 25: | Line 25: | ||
==Links== | ==Links== | ||
| − | * | + | * https://github.com/lentinj/u-boot/blob/master/doc/README.NetConsole |
* http://wiki.openvz.org/Remote_console_setup | * http://wiki.openvz.org/Remote_console_setup | ||
Latest revision as of 00:03, 10 April 2018
On this page you will learn how to move the default RS-232 console to Ethernet. This might be useful in systems where you want to use the RS-232 port for something else or if you want a remote console.
Page under construction...
Informations on this page are not guaranteed !!
U-Boot
- modify the config header file for your board and add it:
#define CONFIG_NETCONSOLE 1
- recompile and reflash your U-Boot:
$ make uboot-rebuild
- redefine some environment variables (here 192.168.1.2 is the IP address of my Host PC):
BIOS> setenv ncip 192.168.1.2 BIOS> setenv stdin nc; setenv stdout nc; setenv stderr nc
Linux
- You have to use netconsole script from U-Boot sources (default port is 6666):
$ tools/netconsole <ip> [port]
