Difference between revisions of "FLIR Lepton module usage on APF & OPOS"
From ArmadeusWiki
(→Links) |
(→Connecting Lepton breakout board to your Dev) |
||
Line 29: | Line 29: | ||
| SPI1_MISO (pin 6) || MISO | | SPI1_MISO (pin 6) || MISO | ||
|- | |- | ||
− | | SPI1_MOSI (pin 10) || | + | | SPI1_MOSI (pin 10) || GND |
|} | |} | ||
Revision as of 10:49, 29 August 2017
Page under construction... Informations on this page are not guaranteed !!
FLIR Lepton(tm) thermal camera have been tested on APF6 and OPOS6UL platforms. This page detail how to give it a quick try.
Hardware
- you can use devt kit bought from sparkfun or digikey. Don't forget to buy breakout board AND the sensor ;-).
- only 80x60 models have been tested yet