Difference between revisions of "FuseSoC"
From ArmadeusWiki
(→Introduction) |
(→APF27) |
||
| (10 intermediate revisions by the same user not shown) | |||
| Line 12: | Line 12: | ||
== Install fusesoc == | == Install fusesoc == | ||
| − | [https://github.com/fusesoc/fusesoc-cores Fusesoc] is a python3 package that can be installed with pip : | + | * [https://github.com/fusesoc/fusesoc-cores Fusesoc] is a python3 package that can be installed with pip : |
<pre class="host"> | <pre class="host"> | ||
$ python3 -m pip install fusesoc | $ python3 -m pip install fusesoc | ||
</pre> | </pre> | ||
| − | To be up to date use --upgrade option: | + | * To be up to date use --upgrade option: |
<pre class="host"> | <pre class="host"> | ||
$ python3 -m pip install --upgrade fusesoc | $ python3 -m pip install --upgrade fusesoc | ||
| + | </pre> | ||
| + | |||
| + | * Once installed a command named fusesoc is available on system : | ||
| + | <pre class="host"> | ||
| + | $ fusesoc --version | ||
| + | 1.11.0 | ||
| + | </pre> | ||
| + | |||
| + | * Initialize library: | ||
| + | <pre class="host"> | ||
| + | $ cd workspace | ||
| + | $ fusesoc init | ||
</pre> | </pre> | ||
| Line 30: | Line 42: | ||
First, git clone the blinky project: | First, git clone the blinky project: | ||
<pre class="host"> | <pre class="host"> | ||
| − | $ git | + | $ cd workspace |
| + | $ fusesoc library add --sync-type git blinky https://github.com/fusesoc/blinky | ||
</pre> | </pre> | ||
| − | + | === APF27 === | |
| + | * If you have [[ISE_WebPack_installation_on_Linux|ISE installed correctly]], you can synthesize blinky with following command: | ||
| + | <pre class="host"> | ||
| + | $ fusesoc run --target=apf27 fusesoc:utils:blinky | ||
| + | </pre> | ||
| + | * As we don't configure fpga with impact, the build will finish with an error : | ||
| + | <pre class="host"> | ||
| + | ERROR: Failed to run fusesoc:utils:blinky:1.0 : 'impact' exited with an error code | ||
| + | </pre> | ||
| + | |||
| + | * But the bitstream will be generated in : | ||
| + | <pre class="host"> | ||
| + | ./build/fusesoc_utils_blinky_1.0/apf27-ise/blinky.bit | ||
| + | </pre> | ||
| + | |||
| + | * To configure the FPGA, copy it under your /tftpboot/ directory then download it with U-Boot: | ||
| + | <pre class="host"> | ||
| + | cp ./build/fusesoc_utils_blinky_1.0/apf27-ise/blinky.bit /tftpboot/ | ||
| + | </pre> | ||
| + | * Under U-Boot | ||
| + | <pre class="apf"> | ||
| + | BIOS> tftpboot blinky.bit | ||
| + | BIOS> fpga load 0 ${loadaddr} ${filesize} | ||
| + | </pre> | ||
| + | |||
| + | * Admire the flashing LED | ||
| + | |||
| + | === APF51 === | ||
| + | |||
| + | * If you have [[ISE_WebPack_installation_on_Linux|ISE installed correctly]], you can synthesize blinky with following command: | ||
| + | <pre class="host"> | ||
| + | $ fusesoc run --target=apf51 fusesoc:utils:blinky | ||
| + | </pre> | ||
| + | |||
| + | * As we don't configure fpga with impact, the build will finish with an error : | ||
| + | <pre class="host"> | ||
| + | ERROR: Failed to run fusesoc:utils:blinky:1.0 : 'impact' exited with an error code | ||
| + | </pre> | ||
| + | |||
| + | * But the bitstream will be generated in : | ||
| + | <pre class="host"> | ||
| + | ./build/fusesoc_utils_blinky_1.0/apf51-ise/blinky.bin | ||
| + | </pre> | ||
| + | |||
| + | * To configure the FPGA, copy it under your /tftpboot/ directory then download it with U-Boot: | ||
| + | <pre class="host"> | ||
| + | cp ./build/fusesoc_utils_blinky_1.0/apf51-ise/blinky.bin /tftpboot/ | ||
| + | </pre> | ||
| + | * Under U-Boot | ||
| + | <pre class="apf"> | ||
| + | BIOS> tftpboot blinky.bin | ||
| + | BIOS> fpga load 0 ${loadaddr} ${filesize} | ||
| + | </pre> | ||
| + | |||
| + | * Admire the flashing LED | ||
| + | |||
| + | === OPOS6UL_SP === | ||
| + | |||
| + | * If you have ISE installed correctly, you can synthesize blinky with following command: | ||
| + | <pre class="host"> | ||
| + | $ fusesoc run --target=op6sp fusesoc:utils:blinky | ||
| + | </pre> | ||
| + | |||
| + | * As we don't configure fpga with impact, the build will finish with an error : | ||
| + | <pre class="host"> | ||
| + | ERROR: Failed to run fusesoc:utils:blinky:1.0 : 'impact' exited with an error code | ||
| + | </pre> | ||
| + | |||
| + | * But the bitstream will be generated in : | ||
| + | <pre class="host"> | ||
| + | ./build/fusesoc_utils_blinky_1.0/op6sp-ise/blinky.bit | ||
| + | </pre> | ||
| + | |||
| + | * To configure the FPGA, copy it under your /tftpboot/ directory then download it with U-Boot: | ||
| + | <pre class="host"> | ||
| + | cp ./build/fusesoc_utils_blinky_1.0/op6sp-ise/blinky.bit /tftpboot/ | ||
| + | </pre> | ||
| + | * Under U-Boot | ||
| + | <pre class="apf"> | ||
| + | BIOS> tftpboot blinky.bit | ||
| + | BIOS> fpga load 0 ${loadaddr} ${filesize} | ||
| + | </pre> | ||
| − | * | + | * <strike>Admire the flashing LED</strike> : Fix the configuration bug. |
| − | < | + | |
== Ressources == | == Ressources == | ||
Latest revision as of 14:48, 3 August 2020
Page under construction...
Informations on this page are not guaranteed !!
Introduction
FuseSoC is a package manager written in python and used to assemble different HDL design from libraries together. FuseSoC is like Buildroot or Yocto used for Linux, it's just a «Makefile» that launch different tools to build the system.
Install fusesoc
- Fusesoc is a python3 package that can be installed with pip :
$ python3 -m pip install fusesoc
- To be up to date use --upgrade option:
$ python3 -m pip install --upgrade fusesoc
- Once installed a command named fusesoc is available on system :
$ fusesoc --version 1.11.0
- Initialize library:
$ cd workspace $ fusesoc init
Blinky
Blinky is a project that aim do blink all FPGA board with a gateware constructed from fusesoc tool.
Here the way to blink Armadeus board with blinky.
First, git clone the blinky project:
$ cd workspace $ fusesoc library add --sync-type git blinky https://github.com/fusesoc/blinky
APF27
- If you have ISE installed correctly, you can synthesize blinky with following command:
$ fusesoc run --target=apf27 fusesoc:utils:blinky
- As we don't configure fpga with impact, the build will finish with an error :
ERROR: Failed to run fusesoc:utils:blinky:1.0 : 'impact' exited with an error code
- But the bitstream will be generated in :
./build/fusesoc_utils_blinky_1.0/apf27-ise/blinky.bit
- To configure the FPGA, copy it under your /tftpboot/ directory then download it with U-Boot:
cp ./build/fusesoc_utils_blinky_1.0/apf27-ise/blinky.bit /tftpboot/
- Under U-Boot
BIOS> tftpboot blinky.bit
BIOS> fpga load 0 ${loadaddr} ${filesize}
- Admire the flashing LED
APF51
- If you have ISE installed correctly, you can synthesize blinky with following command:
$ fusesoc run --target=apf51 fusesoc:utils:blinky
- As we don't configure fpga with impact, the build will finish with an error :
ERROR: Failed to run fusesoc:utils:blinky:1.0 : 'impact' exited with an error code
- But the bitstream will be generated in :
./build/fusesoc_utils_blinky_1.0/apf51-ise/blinky.bin
- To configure the FPGA, copy it under your /tftpboot/ directory then download it with U-Boot:
cp ./build/fusesoc_utils_blinky_1.0/apf51-ise/blinky.bin /tftpboot/
- Under U-Boot
BIOS> tftpboot blinky.bin
BIOS> fpga load 0 ${loadaddr} ${filesize}
- Admire the flashing LED
OPOS6UL_SP
- If you have ISE installed correctly, you can synthesize blinky with following command:
$ fusesoc run --target=op6sp fusesoc:utils:blinky
- As we don't configure fpga with impact, the build will finish with an error :
ERROR: Failed to run fusesoc:utils:blinky:1.0 : 'impact' exited with an error code
- But the bitstream will be generated in :
./build/fusesoc_utils_blinky_1.0/op6sp-ise/blinky.bit
- To configure the FPGA, copy it under your /tftpboot/ directory then download it with U-Boot:
cp ./build/fusesoc_utils_blinky_1.0/op6sp-ise/blinky.bit /tftpboot/
- Under U-Boot
BIOS> tftpboot blinky.bit
BIOS> fpga load 0 ${loadaddr} ${filesize}
-
Admire the flashing LED: Fix the configuration bug.
