Difference between revisions of "GSM/GPRS"

From ArmadeusWiki
Jump to: navigation, search
(Links)
(Introduction)
Line 5: Line 5:
 
==Introduction==
 
==Introduction==
 
GSM/GPRS are generally driven through the RS232 bus. AT commands are used to dialog with the module.
 
GSM/GPRS are generally driven through the RS232 bus. AT commands are used to dialog with the module.
 +
GSM MODEM of the APF27Wireless extension board (APW) is connected to the UART5 (/dev/ttySMX4) of the APF27 module.
 +
 
==Usage==
 
==Usage==
  

Revision as of 17:23, 30 December 2009

Page under construction... Construction.png Informations on this page are not guaranteed !!

This page will summarize informations to use the GSM/GPRS module of the APF27Wireless board.

Introduction

GSM/GPRS are generally driven through the RS232 bus. AT commands are used to dialog with the module. GSM MODEM of the APF27Wireless extension board (APW) is connected to the UART5 (/dev/ttySMX4) of the APF27 module.

Usage

Tools to look at

Links