Difference between revisions of "ISP1761 Linux driver"

Revision as of 11:57, 21 June 2008

This page summarizes the informations to use the DevFull's ISP1761 USB Host controller with Linux.

Page under construction... Informations on this page are not guaranteed !!

$ make linux-menuconfig

Device Drivers  ---> USB support  ---> <M> Support for Host-side USB

Device Drivers  ---> Armadeus specific drivers  ---> <M>   isp1761 USB 2.0 Host controller

Three drivers have to be started in order to get the ISP working. They have to be started in the following order:

# modprobe apf9328-isp1761
# modprobe hal_imx
# modprobe pehci

@@ Line 1: / Line 1: @@
-This chip is a USB 2.0 Host/OnTheGo controller from NXP (ex Philips).
+This page summarizes the informations to use the [[ISP1761|DevFull's ISP1761 USB Host controller]] with Linux.
-It will be used on the DevFull board.
-[[Image:Construction.png]]
+{{Under_Construction}}
-==UNDER CONSTRUCTION==
 ==Compilation==
-Activate USB support in Linux:
+* Launch kernel configuration:
+ $ make linux-menuconfig
+* Activate USB support in Linux:
   Device Drivers  ---> USB support  ---> <M> Support for Host-side USB
-and for the moment:
+* and choose ISP controller:
   Device Drivers  ---> Armadeus specific drivers  ---> <M>   isp1761 USB 2.0 Host controller
 ==Usage==
-  # insmod apf9328-isp1761.ko
+* Three drivers have to be started in order to get the ISP working. They have to be started in the following order:
-  # insmod hal_pxa.ko
+  # modprobe apf9328-isp1761
-  # insmod pehci.ko
+  # modprobe hal_imx
+  # modprobe pehci
 ==Links==