Kernel-with-device-tree

From ArmadeusWiki
Revision as of 22:00, 16 June 2012 by PhilippeR (Talk | contribs)

Jump to: navigation, search

Background

The idea behind device tree is quite simple. When the kernel start he needs to initialize the driver for the device on the board. But often on embedded, device can't be discover at running time. In this case, the linux kernel has a c file that initialize the driver for the board. So the kernel must be modified/compiled for each board.

Another way is to provide a small file that describe the board to the linux kernel. When the kernel start, it reads this file (called dtb for Device Tree Binary) to know the device on the board, and initialize usefull drivers.


Some information on device tree may be found here:

Compilation

To use device tree on arm both bootloader (u-boot) and kernel should be compiled with the support of device tree.

u-boot

To enable device tree on u-boot, it's quite simple:

  • change the MACH_TYPE to ~0 (change "#define CONFIG_MACH_TYPE 1698" to "#define CONFIG_MACH_TYPE ~0") in the u-boot configuration file (include/configs/<board>.h)
  • add "#define CONFIG_OF_LIBFDT" in the u-boot configuration file (include/configs/<board>.h).

On armadeus SDK, this file is in this directory: buildroot/target/device/armadeus/<board>/<board>-u-boot-<version>.h

For example, for u-boot 2012.04 on apf27, it's: buildroot/target/devg=ice/armadeus/apf27/apf27-u-boot-2012.04.h

Nothing else needs to be done, because the u-boot image is build by the armadeus SDK with the command "make".

NOTE: on u-boot 2012.04, the command bootm with device tree is broken. If you want to use it,

you need to fix it with the following patch: http://git.denx.de/?p=u-boot.git;a=commit;h=1723997610ace497252d6f9a44ec76c06951ae43

NOTE2: it's fixed on u-boot 2012.04.01

kernel

The kernel 3.4 has already the support of some arm SoC.

  • imxl (apf9328) : no
  • imx27 (apf27) : yes
  • imx51 (apf51) : yes
  • imx28 (apf28) : no

The configuration file should have:

  • CONFIG_MACH_IMX27_DT (on apf27)
  • CONFIG_MACH_IMX51_DT (on apf51)
  • CONFIG_SERIAL_IMX
  • CONFIG_SERIAL_IMX_CONSOLE

Nothing else needs to be done, because the kernel image is build by the armadeus SDK with the command "make".

dtb

A dtb (Device Tree Binary) file is created from a dts (Device Tree Source) file.

The kernel has already the support of device tree for imx27 (apf27) and imx51 (apf51).

But both board (apf27 and apf51) hasn't a dts file. So a file <board>.dts must be added to in the directory arch/arm/boot/dts of the linux kernel.

The armadeus SDK don't have support for dtb image generation. So you have to do it yourself.

  • go to the directory buildroot/output/build/linux-<version>
  • add the file <soc>-<board>.dts the directory arch/arm/boot/dts/
  • build the dtb with the command: make ARCH=arm <soc>-<board>.dtb

The file <soc>-<board>.dtb should appear in arch/arm/boot

Running

Start the u-boot previously compiled, and then :

  • load the kernel in memory
  • load the dtb in memor
  • run the command bootm with 3 arguments: <kernel addr> - <dtb addr>

The second argument is "-", it means that there isn't an initrd to load.

For example, it should be something like this:

BIOS> setenv consoledev ttymxc0
BIOS> setenv baudrate 115200
BIOS> setenv dtbaddr 0xa0800000
BIOS> tftp $loadaddr apf27-linux.bin
BIOS> tftp $dtbaddr imx27-apf27.dtb
BIOS> setenv consoledev ttymxc0
BIOS> setenv console console=$consoledev,115200
BIOS> setenv bootargs ${console} earlyprintk
BIOS> run addnfsargs addipargs
BIOS> bootm $loadaddr - $dtbaddr