Difference between revisions of "Linux Debug"

From ArmadeusWiki
Jump to: navigation, search
(Changing processor registers from Linux user space with imxregs)
(Changing FPGA IP's registers from Linux user space with fpgaregs)
Line 49: Line 49:
 
==Changing FPGA IP's registers from Linux user space with fpgaregs==
 
==Changing FPGA IP's registers from Linux user space with fpgaregs==
  
This tool allows you to access FPGA registers from linux userspace/console. This way you can easily debug your driver directly from the Linux console.
+
see [[FPGA_register]]
 
+
First, you have enable this tool in Buildroot (package selection for target):
+
$ make menuconfig
+
 
+
Once done, compile it:
+
$ make
+
 
+
The generated file is located in buildroot/build_arm_nofpu/fpgaregs-1.0/. Now you can copy it on your target.
+
Then in linux, launch it like that:
+
# fpgaregs address (for read) or fpga address value (for write)
+
 
+
===Examples:===
+
Show register at internal FPGA address 0x0010:
+
# fpgaregs 10
+
 
+
Write 0x0123 to FPGA register 0x0020:
+
# fpgaregs 20 0123
+
  
 
==Links==
 
==Links==

Revision as of 14:32, 8 April 2008

    • Tips to do debug under linux **

Introduction

On this page, you will find usefull informations for debugging Armadeus under Linux

Testing your custom Linux kernel before flashing it

You can test a linux kernel you've generated without having to reflash your board and destroy your currently working image. Indeed Linux kernel images can be loaded and started from SDRAM with U-Boot:

BIOS> tftp 8000000 linux-kernel-2.6.16-arm.bin
BIOS> bootm 8000000


Changing processor registers from Linux user space with imxregs

This tool allows you to access i.MXL registers from Linux userspace/console. This way you debug your driver or access i.MXL hardware functionnalities directly from Linux console.

  • First, you have to enable this tool in Buildroot (package selection for target -> Hardware handling / blockdevices and filesystem maintenance -> imxregs):
$ make menuconfig

Once done, compile it:

$ make

The generated file is located in buildroot/build_arm/imxregs-1.0/. Now you can copy it on your target.

  • To use it, you must clear PAR 1&2 registers (registers access rights) before launching Linux kernel, so in U-Boot type:
BIOS> mw.l 0x00200008 0
BIOS> mw.l 0x00210008 0

If you use it frequently, you can define a small script in U-Boot:

BIOS> setenv unlock_regs mw.l 0x00200008 0\; mw.l 0x00210008 0
BIOS> saveenv

and call it like that before launching your kernel:

BIOS> run unlock_regs
  • Then in Linux console/terminal, launch imxregs like that:
# imxregs REGISTER_NAME  (give it the register name as printed in iMX Ref Manual or just the begining of the name)

or

# imxregs    (to dump all supported registers)

Examples:

  • Show OCR1 registers of each GPIO Port:
# imxregs OCR1
  • Write 123 to OCR1_D register:
# imxregs OCR1_D 123

Changing FPGA IP's registers from Linux user space with fpgaregs

see FPGA_register

Links


FrenchFlag.png Cette page en français