Difference between revisions of "Linux driver for FPGA controlled keyboards"

Revision as of 23:04, 2 September 2007

If not already done in standard Armadeus rootfs:

$ make linux-menuconfig
Device Drivers  ---> Input device support  ---> [*]   Keyboards  ---> <*>   AT keyboard

then

Device Drivers  ---> Armadeus specific drivers  ---> <M>   Armadeus PS/2 driver

Reflash rootfs then:

# modprobe apf9328ps2
input: AT Raw Set 2 keyboard as /class/input/input0
Armadeus PS/2: APF9328KBD AT adapter OK!

If you have a graphical LCD connected to your board (= virtual terminal), then you should see what you type.
If you don't have any virtual terminal, but only the serial console:

# cat /sys/class/input/input0/event0/dev
13:64

If device node in /dev/input is not existing then:

# mkdir -p /dev/input
# mknod /dev/input/event0 c 13 64

# cat /dev/input/event0

Then you should see weirds characters when pressing keyboard keys:

�,~~_�,}�}�3T,QToT6,TT�,�;��, � �

@@ Line 1: / Line 1: @@
+== PAGE UNDER CONSTRUCTION !!! ==
 ==Installation==
 If not already done in standard Armadeus rootfs: