Difference between revisions of "MMC/SD"
From ArmadeusWiki
(Add supported cards) |
|||
| Line 30: | Line 30: | ||
* CD_SW: Card Detect switch | * CD_SW: Card Detect switch | ||
| + | == Supported Cards == | ||
| + | Here is a list of the current cards which were successfully tested:<br> | ||
| + | ===MMC=== | ||
| + | *Hama 256Mo | ||
| + | |||
| + | ===SD:=== | ||
| + | |||
| + | ===miniSD:=== | ||
| + | |||
| + | ===uSD/Transflash:=== | ||
| + | |||
| + | <br> | ||
== Links == | == Links == | ||
* http://elm-chan.org/docs/mmc/mmc_e.html | * http://elm-chan.org/docs/mmc/mmc_e.html | ||
Revision as of 11:52, 15 February 2007
How-To connect an MMC/SD adapter to the APF9328 (through DevLight board)
For instructions on how to use MMC/SD on Linux, see MultiMediaCard page.
Adapter board
We have designed a small adapter board with an MMC/SD connector on it. You need to connect the signals listed in the table below to the APF9328DevLight board one. The WP and CD_SW signals are optional and must be connected to free IOs if used.
Top view:
| Adapter Pin | Desc | Adapter Pin | Desc |
| 1 | +3.3V | 2 | SD_DAT2 |
| 3 | SD_CMD | 4 | SD_DAT3 |
| 5 | SD_CLK | 6 | SD_DAT0 |
| 7 | WP | 8 | SD_DAT1 |
| 9 | CD_SW | 10 | GND |
Remarks:
- Pin 1 (rectangular pad)
- WP: write protect
- CD_SW: Card Detect switch
Supported Cards
Here is a list of the current cards which were successfully tested:
MMC
- Hama 256Mo
SD:
miniSD:
uSD/Transflash:
