Difference between revisions of "MotionSystem"
From ArmadeusWiki
| Line 7: | Line 7: | ||
The project is composed by different componants: | The project is composed by different componants: | ||
* A hardware board on which are plugged R/C servos, accelerometers and ADC multiplexers. | * A hardware board on which are plugged R/C servos, accelerometers and ADC multiplexers. | ||
| − | * A FPGA firmware which manage R/C servo at low level | + | * A FPGA firmware which manage R/C servo at low level (Already written, thank to Sonzerro and Fabien Marteau). |
| − | * A Linux Kernel Driver which manage the FPGA Firware, the ADC multiplexers and ADC | + | * A Linux Kernel Driver which manage the FPGA Firware, the ADC multiplexers and ADC Max1027. |
| + | * A user space daemon which manage the driver and listen on TCP port to accept remote command from the network. | ||
| + | * A user desktop application which sends commands to the daemon. | ||
==Participating Armadeus members== | ==Participating Armadeus members== | ||
Revision as of 20:11, 19 August 2008
Contents
Project Description
The application field of this project is robotics.
The goal of this project is to provide a R/C Servos Controller to manage R/C by different ways, and a motion measurement system via accelerometers.
The project is composed by different componants:
- A hardware board on which are plugged R/C servos, accelerometers and ADC multiplexers.
- A FPGA firmware which manage R/C servo at low level (Already written, thank to Sonzerro and Fabien Marteau).
- A Linux Kernel Driver which manage the FPGA Firware, the ADC multiplexers and ADC Max1027.
- A user space daemon which manage the driver and listen on TCP port to accept remote command from the network.
- A user desktop application which sends commands to the daemon.
