Difference between revisions of "OV9653"

From ArmadeusWiki
Jump to: navigation, search
(New page: OV9653 is an Omnivision 1,3 Mpixels sensor that can be found (for example) in the 22T1 module from Microjet (Taiwaneese company). This module seems to be no more available for sale :-(. Mo...)
 
m
Line 1: Line 1:
OV9653 is an Omnivision 1,3 Mpixels sensor that can be found (for example) in the 22T1 module from Microjet (Taiwaneese company).
+
OV9653 is an Omnivision 1,3 Mpixels sensor that can be found in the following camera modules:
This module seems to be no more available for sale :-(. More informations about Microjet's camera modules can be found [http://www.microjet.com.tw/english/product_cmos.htm here]
+
* in the [http://www.microjet.com.tw/english/product_cmos.htm 22T1 module] from Microjet (Taiwaneese company). This module seems to be no more available for sale :-(. If you were a VirtualCogs (R.I.P.) owner, you may have one.
 +
* [http://www.shchl.com/English/products&services-ccm.html C139] of SHCHL (Shangai). Seems to be the same module than 22T1 (to confirm). This module seems still available [http://www.electronics123.com/s.nl/it.A/id.2698/.f?sc=8&category=241 here (US)]
  
 
==Connecting the 22T1 module to the APF27==
 
==Connecting the 22T1 module to the APF27==

Revision as of 23:29, 5 June 2009

OV9653 is an Omnivision 1,3 Mpixels sensor that can be found in the following camera modules:

  • in the 22T1 module from Microjet (Taiwaneese company). This module seems to be no more available for sale :-(. If you were a VirtualCogs (R.I.P.) owner, you may have one.
  • C139 of SHCHL (Shangai). Seems to be the same module than 22T1 (to confirm). This module seems still available here (US)

Connecting the 22T1 module to the APF27

  • Datasheet of the 22T1 module are available here. They only detail the hardware interface.
  • Omnivision sensors are easily available but when it comes to obtain the datasheet of the sensor it becomes harder. Even if you find some datasheet, the informations inside must be read with caution: some are erronous. So here is one of those.

Description

  • CSI port (8 bits data + 4 bits control signals) is used to transmit images. (10 bits mode not usable on i.MX)
  • I2C bus is used to configure the sensor.

Adaptation board

  • Schematics and layouts for an APF27 adaptation board will be available [here] soon.

Links