Difference between revisions of "Opos6ul sp fpga simple howto"

From ArmadeusWiki
Jump to: navigation, search
(Software tools)
(Architecture)
Line 8: Line 8:
 
= Architecture =
 
= Architecture =
  
[[File:opos6ul_sp_fpga_tuto_01.png]]
+
[[File:opos6ul_sp_fpga_tuto_01.png|center]]
 +
 
 +
In this tutorial, a simple FPGA design will be done. The objective is to instanciate a block of RAM in the FPGA and be able to read and write data in it from U-Boot then Linux.
  
 
= Software tools =
 
= Software tools =

Revision as of 10:32, 22 July 2020

Page under construction... Construction.png Informations on this page are not guaranteed !!

Introduction

This page is a step-by-step tutorial to explain how to develop with FPGA (spartan6) on OPOS6UL_SP Armadeus board.

Architecture

Opos6ul sp fpga tuto 01.png

In this tutorial, a simple FPGA design will be done. The objective is to instanciate a block of RAM in the FPGA and be able to read and write data in it from U-Boot then Linux.

Software tools

A recent Armadeus BSP is required.

$ git clone git://git.code.sf.net/p/armadeus/code op6sp
$ cd op6sp
$ make
$ make opos6ulsp_defconfig
$ make

Hardware description

Links