Difference between revisions of "PrBoom"

From ArmadeusWiki
Jump to: navigation, search
m (2. put games files on NFS export)
m (Install)
Line 12: Line 12:
 
[[Image:Menuconfig_package.png]]<br>
 
[[Image:Menuconfig_package.png]]<br>
 
<br>
 
<br>
[[Image:Menuconfig_package_graphics.png]]<br>
+
[[Image:Menuconfig_package_games.png]]<br>
 
<br>
 
<br>
 
[[Image:Menuconfig_package_prboom.png]]
 
[[Image:Menuconfig_package_prboom.png]]

Revision as of 09:11, 29 January 2009

PrBoom

PrBoom
Gametype FPS
Web site http://
Doom.jpg
Fully working
Video http://www.youtube.com/watch?v=256RY8DaoX0

Infos

Doom clone derived from original ID Software sources and enhanced (SDL support, bugs correction...). Doom is the sequel of Wolfenstein. It is working quite well on 8bpp framebuffers; for 16bpp one, a bug has to be corrected in i.MX framebuffer (ongoing).
PrBoom is integrated in Buildroot on latest SVN snapshots. It needs SDL, SDL_mixer & SDL_net. Currently there is no sound support on Armadeus boards. Video was taken on the new LCD. Runs at full speed in 320x240 with only ~40% CPU usage in 8bpp mode.

Install

  • Launch Buildroot configuration:
$ make menuconfig

Menuconfig package.png

Menuconfig package games.png

Menuconfig package prboom.png

Activate PrBoom package (it will autoselect SDL, SDL_mixer and SDL_net). Then, exit and save your config. Re-Build your rootfs:

$ make

APF9328 with only 8 MBytes of FLASH

As the generated rootfs is too big to be put on the 8MBytes APF9328 FLASH, there are 2 solutions:

1. put rootfs on a MMC/SD

In Buildroot configure rootfs to be tar-ed:

Target filesystem options ---> Menuconfig tar rootfs.png and then:

[armadeus]$ sudo tar xvf /.../buildroot/binaries/apf9328/rootfs.arm.tar -C /media/usbdisk
[armadeus]$ sudo umount /media/usbdisk

in U-Boot then use (with MMC inserted):

BIOS> run mmcboot

After Linux boot on Target, launch the game.

2. put games files on NFS export

armadeus/buildroot/build_armv4t/root/usr/games/prboom, armadeus/buildroot/project_build_armv4t/apf9328/root/usr/share/games/doom/prboom.wad and doom1.wad.!! Files should be in the same directory !! Then cd in directory and launch the game:

Launching

# /usr/games/prboom -width 320 -height 240 &

or

# /mnt/nfs/usr/games/prboom -width 320 -height 240 &

Troubleshots

  • If SDL is complaining because it can't find any mouse (Unable to init SDL: Unable to open mouse) then, before launching the game, do:
# export SDL_NOMOUSE=1