Difference between revisions of "SPI"
From ArmadeusWiki
(New page: This page will summarize the informations to use the SPI bus on our boards. == Overview == [http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus SPI] ('''S'''erial '''P'''eripher...) |
|||
| Line 18: | Line 18: | ||
== Tested SPI chips == | == Tested SPI chips == | ||
| − | * ADC : [Max1027] | + | * ADC : [[Max1027]] |
| − | * EEPROM : [93LCXX] | + | * EEPROM : [[93LCXX]] |
== Links == | == Links == | ||
* SPI description on wikipedia. | * SPI description on wikipedia. | ||
Revision as of 18:44, 16 November 2009
This page will summarize the informations to use the SPI bus on our boards.
Overview
SPI (Serial Peripheral Interface) is a 3-wire full-duplex serial bus. Wires used in SPI are :
- MOSI, Master Output Slave Input : send data to slave.
- MISO, Master Input Slave Output : receive data from slave.
- SCLK, : Serial Clock signal used to synchronise the transmission. (In imx27 (apf27) maximum frequency of SCLK is 22.167MHz in master mode and 16.625 in slave mode.
- SSx, Slave Select : used to select the slave for communication with master.
On APF27, the imx27 contains 3 SPI devices that can be configured in master or slave. APF9328 (imxL) contains 2 SPI.
Linux configuration
Linux user space C code
Tested SPI chips
Links
- SPI description on wikipedia.
