Difference between revisions of "Setup"

From ArmadeusWiki
Jump to: navigation, search
(Packages and Modules)
(First StartUp)
Line 2: Line 2:
  
 
==First StartUp==
 
==First StartUp==
Just got your Armadeus board and want to start playing with it ? <br>
+
Just got your Armadeus board and want to start playing with it ? So follow this quick list to setup your environment accordingly: <br>
Then follow this quick list to setup your environment accordingly: <br>
+
 
*1. Connect your APF to your custom development board or to your DevLight ( This will be further refered to "the Target") --->> [[Image:Apf_on_devlight.png]] <br>
 
*1. Connect your APF to your custom development board or to your DevLight ( This will be further refered to "the Target") --->> [[Image:Apf_on_devlight.png]] <br>
 
*2. Connect your PC (= the Host) to your development system with a null-modem RS232 cable <br>
 
*2. Connect your PC (= the Host) to your development system with a null-modem RS232 cable <br>
 
*3. Connect the power supply on your system ('''+5Vdc on a Devlight. + is in the middle of the connector, - on the side''') <br>
 
*3. Connect the power supply on your system ('''+5Vdc on a Devlight. + is in the middle of the connector, - on the side''') <br>
 
*4. [[Communicate | Establish the communication between your Host and your APF]] <br>
 
*4. [[Communicate | Establish the communication between your Host and your APF]] <br>
*5. Verify your APF by starting Linux: In U-Boot, type "boot". Several informations will be displayed on your console like on this [[Linux start screenshot | screenshot ]] <br>
+
*5. Verify your APF by starting Linux: In U-Boot console, type "boot". Several informations will be displayed on your terminal like on this [[Linux start screenshot | screenshot ]] <br>
 
*6. If Linux has successfully started, you can proceed with the toolchain installation. See Basics below <br>
 
*6. If Linux has successfully started, you can proceed with the toolchain installation. See Basics below <br>
  

Revision as of 23:18, 8 December 2007

On this page, you will find all the usefull informations you need to configure your Armadeus board for optimum usage.

First StartUp

Just got your Armadeus board and want to start playing with it ? So follow this quick list to setup your environment accordingly:

  • 1. Connect your APF to your custom development board or to your DevLight ( This will be further refered to "the Target") --->> Apf on devlight.png
  • 2. Connect your PC (= the Host) to your development system with a null-modem RS232 cable
  • 3. Connect the power supply on your system (+5Vdc on a Devlight. + is in the middle of the connector, - on the side)
  • 4. Establish the communication between your Host and your APF
  • 5. Verify your APF by starting Linux: In U-Boot console, type "boot". Several informations will be displayed on your terminal like on this screenshot
  • 6. If Linux has successfully started, you can proceed with the toolchain installation. See Basics below

Basics

  • Toolchain: How to install the development environment for the Armadeus boards
  • Communicate: How to communicate with the Armadeus boards from the Host
  • Target Software Installation: How to install, uBoot, Linux and your RootFS on the Armadeus boards

Packages and Modules

Advanced

  • BootLoader: (U-Boot useful tips)
  • BootStrap: Install an uBoot from scratch or recover your uBoot if it is corrupted


FrenchFlag.png Cette page en Français