Difference between revisions of "Setup"

From ArmadeusWiki
Jump to: navigation, search
(Adeos accessible from Software->Xenomai)
m (Intermediate)
Line 34: Line 34:
 
* [[USB Host]]: How to use the ISP176x USB Host controller of the APF9328DevFull
 
* [[USB Host]]: How to use the ISP176x USB Host controller of the APF9328DevFull
 
* [[TSC2102 Linux driver| TSC2102 Linux driver details ]]: How to configure and use the touchscreen controller
 
* [[TSC2102 Linux driver| TSC2102 Linux driver details ]]: How to configure and use the touchscreen controller
 +
* [[CAN bus Linux driver]]: how to configure and use the CAN controller of the DevFull
  
 
==Advanced==
 
==Advanced==

Revision as of 14:28, 12 July 2008

On this page, you will find all the usefull informations you need to configure your Armadeus board for optimum usage.

First StartUp

Just got your Armadeus board and want to start playing with it ? Follow these quick steps to setup your environment accordingly:

  1. Connect your APF to your development board (custom or DevLight/DevFull) ( your system will be hereafter refered to as "the Target") --->> Apf on devlight.png
  2. Connect your PC (= "the Host") to your board with a null-modem RS232 cable. If you don't have a RS232 port on your Host, you can use a "USB <-> serial" converter.
  3. Connect the power supply on your development board.
  4. Establish the communication between your Host and your APF.
  5. Verify your system is booting by starting Linux: In U-Boot console, type "boot". Several informations will be displayed on your terminal like on this screenshot (Default login is "root" with an empty password).
  6. If Linux has successfully started, your system is operational. You can then proceed with the toolchain installation. See Basics below.

Basics

Intermediate

  • Network Configuration: how to configure Host and Target network (NFS, TFTP)
  • Serial Transfer: how to transfer files between your Host and your Armadeus board with the RS232 link (if you don't have Ethernet)
  • MultiMediaCard: how to use MMC/SD cards on Linux with your Armadeus board

TO BE REMOVED FROM THIS PAGE:

Advanced

  • BootLoader: (U-Boot useful tips)
  • BootStrap: Install U-Boot from scratch or recover your U-Boot if it was corrupted


FrenchFlag.png Cette page en Français