Difference between revisions of "Setup"

From ArmadeusWiki
Jump to: navigation, search
(Advanced)
(Basics)
Line 12: Line 12:
 
==Basics==
 
==Basics==
 
* [[Toolchain]]: How to install the development environment for the Armadeus boards
 
* [[Toolchain]]: How to install the development environment for the Armadeus boards
* [[Communicate]]: How to communicate with the Armadeus boards from the Host
+
* [[Communicate]]: How to communicate with your board from the Host
* [[Target Software Installation]]: How to install U-Boot, Linux and your Rootfs on the Armadeus boards
+
* [[Target Software Installation]]: How to install U-Boot, Linux and your Rootfs on your board
  
 
==Intermediate==
 
==Intermediate==

Revision as of 20:55, 13 March 2008

On this page, you will find all the usefull informations you need to configure your Armadeus board for optimum usage.

First StartUp

Just got your Armadeus board and want to start playing with it ? So follow this quick list to setup your environment accordingly:

  • 1. Connect your APF to your custom development board or to your DevLight ( This will be further refered to "the Target") --->> Apf on devlight.png
  • 2. Connect your PC (= the Host) to your development system with a null-modem RS232 cable
  • 3. Connect the power supply on your system (+5Vdc on a Devlight. + is in the middle of the connector, - on the side)
  • 4. Establish the communication between your Host and your APF
  • 5. Verify your APF by starting Linux: In U-Boot console, type "boot". Several informations will be displayed on your terminal like on this screenshot
  • 6. If Linux has successfully started, you can proceed with the toolchain installation. See Basics below

Basics

Intermediate

Advanced / Dangerous ;-)

  • BootLoader: (U-Boot useful tips)
  • BootStrap: Install U-Boot from scratch or recover your U-Boot if it was corrupted


FrenchFlag.png Cette page en Français