Difference between revisions of "USB"
From ArmadeusWiki
(→Usage) |
|||
| Line 7: | Line 7: | ||
* '''USB Host mode''': you can connect any standard USB devices to your board. | * '''USB Host mode''': you can connect any standard USB devices to your board. | ||
**[[ISP1761_Linux_driver | See how to configure USB Host mode of the APF9328+DevFull]] | **[[ISP1761_Linux_driver | See how to configure USB Host mode of the APF9328+DevFull]] | ||
| + | **[[USB_Host|See how to use USB Host on all APF boards]] | ||
* '''USB OnTheGo''': your board can act as Host or Device, depending on the context. Not supported yet (only possible on the [[APF27]] & [[APF51]]). | * '''USB OnTheGo''': your board can act as Host or Device, depending on the context. Not supported yet (only possible on the [[APF27]] & [[APF51]]). | ||
Revision as of 11:16, 18 April 2011
USB stands for Universal Serial Bus and is a defacto standard in the nowadays computer world.
Usage
There are 3 ways to use USB:
- USB Device mode: your board can be connected to any PC's USB port and used as a standard USB device.
- See how to configure USB device mode of your APF (no specific hardware is needed except a USB cable).
- USB Host mode: you can connect any standard USB devices to your board.
- USB OnTheGo: your board can act as Host or Device, depending on the context. Not supported yet (only possible on the APF27 & APF51).
