USB

USB stands for Universal Serial Bus and is a defacto standard in the nowadays computer world.

Usage

There are 3 ways to use USB:

USB Device mode: your board can be connected to any PC's USB port and used as a standard USB device.
- See how to configure USB device mode of the APF9328 (no specific hardware needed except a USB cable).
USB Host mode: you can connect any standard USB devices to your board.
- See how to configure USB Host mode of the APF9328+DevFull or the APF27
USB OnTheGo: your board can act as Host or Device, depending on the context. Not supported yet (only possible on the APF27).