Camera interface: Difference between revisions

From ArmadeusWiki
Jump to navigationJump to search
JulienB (talk | contribs)
JulienB (talk | contribs)
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{Under_Construction}}
On this page you will find useful informations on how to use the Camera/CMOS Sensor Interface (CSI) of the i.MX chip found on your APF board.
On this page you will find useful informations on how to use the Camera/CMOS Sensor Interface (CSI) of the i.MX chip found on your APF board.
Currently only the i.MX27/APF27 are supported.
Currently only the [[APF27]] & [[APF6]] are supported.


==Hardware==
==Hardware==
* All the signals of the i.MX27 CSI interface can be found on the J9 connector of the APF27Dev development board.
===APF27===
* You should connect an external camera compatible with the CSI interface (8bits data) to see something ;-). Here are the tested sensor models:
* All the signals of the i.MX27 CSI interface can be found on the J9 connector of the [[APF27Dev|APF27Dev development board]].
** [[OV9653]]
* You should connect an external camera/sensor compatible with the CSI interface (8bits data bus) to see something ;-). Here are the tested sensor models:
** [[OV9653]] / [[OV9655]]
** [[OV7670]]
** [[OV3640]]
* All these sensors are controllable through an I2C interface. The one on J8 connector of [[APF27Dev]] can for example be used.
 
===APF6===
* [[APF6Dev]] boards have a wandcam (OV5640) compatible connector (near the PCIexpress one).
* MIPI bus is used on [[APF6Dev]]


==Driver==
==Driver==
* From now we consider that you have a supported camera module plugged on you development board
* From now we consider that you have a supported camera module plugged on your development board
* CSI interface can be driven through the V4L2 (Video For Linux) standard interface as soon as CSI driver is loaded:  
* CSI interface can be driven through the V4L2 (Video For Linux) standard interface as soon as CSI/MIPI driver is loaded:
<pre class="apf">
{| border="1" cellpadding="10" cellspacing="0" summary="Camera drivers" class="wikitable"
# modprobe mx27_camera
|- style="background:#efefef;" align="center"
! APF27 || APF6 (kernel 3.19+)
|---
|<pre class="apf">
# modprobe mx27_camera
</pre>
</pre>
* Then you have to load your camera driver in order for him to "attach" to the CSI one (for example for the OV9653):
* Then you have to load your camera driver in order for him to "attach" to the CSI one (for example for the OV9653):
Line 19: Line 29:
  # modprobe ov96xx
  # modprobe ov96xx
</pre>
</pre>
|
<pre class="apf">
# modprobe -a mx6-camera mipi-csi2 ov5640-mipi
</pre>
|}
* Now it's up to you to configure your camera with the tools/API the camera driver is offering...
* Now it's up to you to configure your camera with the tools/API the camera driver is offering...
==Test==
* We have a small SDL/V4L2 app to quickly test that your camera is working properly (you will also need a LCD interface): ''target/demos/camera/capture/''
** it may be installed by default on your rootfs depending on your Buildroot defconfig.
** to launch it (here to have a 640x480 camera image on a LW700 TFT):
<pre class=apf>
# capture --width 640 --height 480 --cam_width 640 --cam_height 480
</pre>
* To trigger autofocus (APF6 with 3.19+ kernel):
<pre class=apf>
# v4l2-ctl -c auto_focus_start=1
</pre>


==Going further==
==Going further==
Line 26: Line 56:
==Links==
==Links==
* [http://linux.bytesex.org/v4l2/ Video4Linux]
* [http://linux.bytesex.org/v4l2/ Video4Linux]
[[Category:Vision]]

Latest revision as of 15:54, 1 April 2016

On this page you will find useful informations on how to use the Camera/CMOS Sensor Interface (CSI) of the i.MX chip found on your APF board. Currently only the APF27 & APF6 are supported.

Hardware

APF27

  • All the signals of the i.MX27 CSI interface can be found on the J9 connector of the APF27Dev development board.
  • You should connect an external camera/sensor compatible with the CSI interface (8bits data bus) to see something ;-). Here are the tested sensor models:
  • All these sensors are controllable through an I2C interface. The one on J8 connector of APF27Dev can for example be used.

APF6

  • APF6Dev boards have a wandcam (OV5640) compatible connector (near the PCIexpress one).
  • MIPI bus is used on APF6Dev

Driver

  • From now we consider that you have a supported camera module plugged on your development board
  • CSI interface can be driven through the V4L2 (Video For Linux) standard interface as soon as CSI/MIPI driver is loaded:
APF27 APF6 (kernel 3.19+)
# modprobe mx27_camera
  • Then you have to load your camera driver in order for him to "attach" to the CSI one (for example for the OV9653):
 # modprobe ov96xx
# modprobe -a mx6-camera mipi-csi2 ov5640-mipi


  • Now it's up to you to configure your camera with the tools/API the camera driver is offering...

Test

  • We have a small SDL/V4L2 app to quickly test that your camera is working properly (you will also need a LCD interface): target/demos/camera/capture/
    • it may be installed by default on your rootfs depending on your Buildroot defconfig.
    • to launch it (here to have a 640x480 camera image on a LW700 TFT):
# capture --width 640 --height 480 --cam_width 640 --cam_height 480
  • To trigger autofocus (APF6 with 3.19+ kernel):
# v4l2-ctl -c auto_focus_start=1

Going further

Links