FPGA registers access from Linux userspace: Difference between revisions
SebastienVC (talk | contribs) |
|||
| Line 62: | Line 62: | ||
''write'' | ''write'' | ||
<source lang="c"> | <source lang="c"> | ||
*(unsigned | *(unsigned int*)(ptr_fpga+(address)) = (unsigned short)value; | ||
</source> | </source> | ||
''read'' | ''read'' | ||
<source lang=" | <source lang="c"> | ||
value = *(unsigned int*)(ptr_fpga+(address)); | value = *(unsigned int*)(ptr_fpga+(address)); | ||
</source> | </source> | ||
Revision as of 11:42, 19 November 2008
fpgaregs
compile
To access FPGA registers a tool named fpgaregs is available under target/linux/module/fpga/dev_tools/ directory. To compile it for apf9328, use the command above :
arm-linux-gcc -mcpu=arm920t fpgaregs.c -o fpgaregsuse
fpgaregs can be used to read and write 16 or 32 bits registers.
read 16 bits
fpgaregs w <address>Where <address> is an address relative to fpga mapping in hexadecimal value.
write 16 bits
fpgaregs w <address> <value>Where <value> is hexadecimal value to write.
read 32 bits
fpgaregs l <address>write 32 bits
fpgaregs l <address> <value>the mmap problem
To access fpga register, fpgaregs use the mmap() system call :
ptr_fpga = mmap (0, 8192, PROT_READ|PROT_WRITE, MAP_SHARED, ffpga, FPGA_ADDRESS);Thanks to this function, fpga registers are accessible directly on memory with pointer ptr_fpga. To read and write in 16bits or in 32 bits we will cast the pointer value in unsigned short or unsigned int :
16bits write
*(unsigned short*)(ptr_fpga+(address)) = (unsigned short)value;read
value = *(unsigned short*)(ptr_fpga+(address));32 bits write
*(unsigned int*)(ptr_fpga+(address)) = (unsigned short)value;read
value = *(unsigned int*)(ptr_fpga+(address));The problem
By default, if the specific arm920t target is not specified, arm-linux-gcc will try to generate compatible read/write for all ARM9 model when it access register in 16bits. Indeed it seems that not all ARM9 have 16bits read/write capabilities (ldrh asm instruction).
As the interface between i.MXL and FPGA on APF9328 has no 8bits read/write capabilities, each 8 bits access is recognized by the FPGA as a 16bits access. So on each 16bits access of the i.MXL, FPGA will process two 16bits access instead of 1. That is a problem when accessing a FIFO for example.
To avoid this painful problem don't forget the -mcpu=arm920t option when compiling fpgaregs for APF9328.
Links
- http://sources.redhat.com/ml/crossgcc/2005-08/msg00120.html : Explanation of the problem.