Camera interface

From ArmadeusWiki
Jump to navigationJump to search

Page under construction... Informations on this page are not guaranteed !!

On this page you will find useful informations on how to use the Camera/CMOS Sensor Interface (CSI) of the i.MX chip found on your APF board. Currently only the i.MX27/APF27 are supported.

Hardware

  • All the signals of the i.MX27 CSI interface can be found on the J9 connector of the APF27Dev development board.
  • You should connect an external camera compatible with the CSI interface (8bits data) to see something ;-). Here are the tested sensor models:

Driver

  • CSI interface can be driven through the V4L2 (Video For Linux) standard interface. To activate it you have to:
 $ make linux26-menuconfig
    Multimedia devices  --->
        <M> Video For Linux
        ...
        [*] Customize analog and hybrid tuner modules to build  --->
            None
        [*] Video capture adapters  --->
            ...
            -M-   SoC camera support
            ...
            <M>   i.MX27 Quick Capture Interface driver
 # modprobe mx27_camera