Camera interface

From ArmadeusWiki
Revision as of 10:55, 10 June 2009 by JulienB (talk | contribs) (move driver installation)
Jump to navigationJump to search

Page under construction... Informations on this page are not guaranteed !!

On this page you will find useful informations on how to use the Camera/CMOS Sensor Interface (CSI) of the i.MX chip found on your APF board. Currently only the i.MX27/APF27 are supported.

Hardware

  • All the signals of the i.MX27 CSI interface can be found on the J9 connector of the APF27Dev development board.
  • You should connect an external camera compatible with the CSI interface (8bits data) to see something ;-). Here are the tested sensor models:

Driver

  • CSI interface can be driven through the V4L2 (Video For Linux) standard interface as soon as CSI driver is loaded:
 # modprobe mx27_camera