Camera interface

From ArmadeusWiki
Jump to navigationJump to search

Page under construction... Informations on this page are not guaranteed !!

On this page you will find useful informations on how to use the Camera/CMOS Sensor Interface (CSI) of the i.MX chip found on your APF board. Currently only the i.MX27/APF27 are supported.

Hardware

  • All the signals of the i.MX27 CSI interface can be found on the J9 connector of the APF27Dev development board.
  • You should connect an external camera compatible with the CSI interface (8bits data) to see something ;-). Here are the tested sensor models:

Driver

  • From now we consider that you have a supported camera module plugged on you development board
  • CSI interface can be driven through the V4L2 (Video For Linux) standard interface as soon as CSI driver is loaded:
 # modprobe mx27_camera
  • Then you have to load your camera driver in order for him to "attach" to the CSI one (for example for the OV9653):
 # modprobe ov96xx
  • Now it's up to you to configure your camera with the tools/API the camera driver is offering...

Going further

Links