U-Boot Splash Screen

From ArmadeusWiki
Revision as of 17:17, 14 March 2017 by JulienB (talk | contribs) (→Test it)
Jump to navigationJump to search

Page under construction... Informations on this page are not guaranteed !!

Introduction

On this page you will learn how to activate LCD support in U-Boot and display a Splash Screen at boot. The following instructions have only be tested on OPOS6UL.

Installation

  • Save your image as BMP file (in Gimp use Run-Length (RLE) encoding, no alpha channel and no color informations (compatibility options))
  • Activate LCD in U-Boot (here ST0700):
BIOS> setenv videomode video=ctfb:x:800,y:480,depth:18,pclk:33033,le:8,ri:4,up:2,lo:4,hs:64,vs:4,sync:0,vmode:0

Test it

BIOS> tftpboot ${loadaddr} xxx.bmp
BIOS> bmp info ${loadaddr}
Image size    : 296 x 72
Bits per pixel: 8
Compression   : 0
BIOS> bmp display ${loadaddr} 100 50

Deploy it

  • Here we assume that logo is stored in /boot directory of rootfs eMMC partition as logo.bmp:
BIOS> setenv splashimage 0x80000000
BIOS> setenv splashfile /boot/logo.bmp
BIOS> setenv splashsource mmc_fs

Links