PWM

From ArmadeusWiki
Revision as of 18:23, 2 February 2007 by JulienB (talk | contribs) (→Usage)
Jump to navigationJump to search

On this page, you will find usefull informations to configure and use the Pulse Width Modulation (PWM) capabilities of your APF9328 board.

Your is capable of driving 2 PWM signals:

  • one is linked to the LCD controller and allow to control LCD backlight, see LCD page for more informations
  • the other can be used to generate PWM signals in several mode:
* audio playback
* real PWM

Configuration

First be sure to have the PWM Linux driver activated:

$ make linux-menuconfig

File:PWMconfig.png

$ make

Installation

Either copy generated module target/linux/modules/pwm/pwm.ko to your system with TFTP or NFS or reflash the generated rootfs

Usage

Load the module:

# insmod /lib/modules/2.6.18.1/extra/pwm/pwm.ko

or (if you have reflashed your rootfs):

# modprobe pwm

PWM Mode

Now you have access to /sys/class/pwm/ functionnalities:

  • to activate PWM:
# echo 1 > /sys/class/pwm/pwm0/active
  • to de-activate PWM:
# echo 0 > /sys/class/pwm/pwm0/active
  • to change frequency (for example 500 Hz):
# echo 500 > /sys/class/pwm/pwm0/frequency
  • to change period (for example 100us):
# echo 100 > /sys/class/pwm/pwm0/period
  • to change duty cycle (for example 50.0%)
# echo 500 > /sys/class/pwm/pwm0/duty

Audio Mode

Audio playback mode is not fully functionnal/tested yet. Ask JulienB if you really need it...

Links