ISP1761 Linux driver

From ArmadeusWiki
Revision as of 13:04, 21 June 2008 by JulienB (talk | contribs) (→Usage)
Jump to navigationJump to search

This page summarizes the informations to use the DevFull's ISP1761 USB Host controller with Linux.

Page under construction... Informations on this page are not guaranteed !!

Compilation

  • Launch kernel configuration:
$ make linux-menuconfig
  • Activate USB support in Linux:
Device Drivers  ---> USB support  ---> <M> Support for Host-side USB
  • and choose ISP controller:
Device Drivers  ---> Armadeus specific drivers  ---> <M>   isp1761 USB 2.0 Host controller

Usage

  • Three drivers have to be started in order to get the ISP working. They have to be started in the following order:
# modprobe apf9328-isp1761
# modprobe hal_imx
# modprobe pehci
  • and then you should see (on console):
isp1761 isp1761.0: PHILIPS ISP1761
isp1761 isp1761.0: new USB bus registered, assigned bus number 1
isp1761 isp1761.0: irq 138, io mem 0x00000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
/xxxx/armadeus_trunk/target/linux/modules/isp1761/hal/hal_imx.c: Registered Driver Philips
/xxxx/armadeus_trunk/target/linux/modules/isp1761/host/pehci.c: Host Driver has been Registered
# usb 1-1: new high speed USB device using isp1761 and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected

Links